Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Garland
If you live in Garland and your patio slider sticks, fogs between the panes, or lets a North Texas draft roll through the living room every January, here’s the straight answer: most sliding door work in this city runs $900 to $6,800 depending on whether you’re doing a basic roller and track repair, a full-frame replacement on a 1960s ranch, or a custom panoramic system with impact-rated glass. We serve Garland out of our Dallas-Fort Worth office, and we’ve been working the streets here long enough to know what a tornado rebuild looks like versus an untouched original. Call (888) 635-0804 for a quote that’s written down before any work starts.
Why TruePane Windows & Doors Is Garland’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 on a rule that still sits on the whiteboard: if the pane is not true, the job is not done. That’s not a slogan. It’s the standard we hold on every sliding door install from Firewheel Estates to the older streets off Broadway. Garland homeowners call us because we register both warranty layers in writing before the truck leaves the driveway, and because our Done Right Promise means if a track binds or a roller fails a month later, we come back and make it right. No paperwork fights, no arguing.
Our technicians are background-checked and uniformed. They measure every opening twice. They quote manufacturer lines side by side on paper. And whether the job is a basic screen door install near Spring Creek or a full panoramic slider on a home overlooking Lake Ray Hubbard, the crew works the way they would in their own mother’s house. That’s the standard Dale set when he started, and it hasn’t moved.
We’re not the cheapest bid in Garland. We’re the last call you make after the cheap bid leaves you with a door that binds in July and fogs in December. Our Sliding & Patio Doors team works on homes across Garland every week, and the people we work for are homeowners who plan to stay in this city another twenty years. They want the job done right once. That’s the only kind of work we take.
Our Sliding & Patio Doors Services in Garland
Patio Sliding Doors
Most Garland homes were built between the 1950s and 1970s, and the original patio slider back then was aluminum, single-pane, and never meant to last fifty years. We replace those with modern vinyl, fiberglass, or aluminum-clad doors sized to the original opening, then seal and flash them so the next hailstorm doesn’t find a way in. For homeowners looking to upgrade their entire entryway, our Custom Windows & Doors - Garland service offers tailored solutions. Full-frame replacement is the norm in Garland, not the exception, because the old aluminum frames corrode past the point where a retrofit insert makes sense.
Panoramic Sliding Systems
Homes on the lake side of Garland and the newer builds east of Firewheel have the wall space for something wider than a standard slider. A multi-panel panoramic system opens an entire wall onto a patio or pool. These are the high-end jobs where lead time is the real constraint, not labor. We order from manufacturers like Marvin and Andersen, and the price is fixed in writing before anything gets ordered. You’ll know the delivery window, the install date, and the final number before you sign.
Heavy-Duty Sliding Doors
North Texas hail is not gentle on door hardware. Heavy-duty sliders with reinforced frames and commercial-grade rollers hold up better on the east side of Garland, where storm fronts come hard off the prairie. We spec these for homes in the 75043 and 75044 ZIP codes that took direct hits in the 2015 tornado and have rebuilt with an eye toward what the next storm might bring.
Pocket & Barn Doors
Garland’s ranch homes often have tight hallways where a standard swinging door eats up usable floor space. A pocket door tucks into the wall; a barn door slides on a track above the opening. Both are popular in the older neighborhoods around downtown Garland where square footage is fixed and every foot matters. We can walk you through both, and our Door Installation - Garland service includes the framing work that pocket doors require, which is more than most homeowners expect.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We’re an authorized installer for more than a dozen manufacturer lines, and on most sliding door jobs in Garland we quote Andersen, Marvin, Pella, and Milgard side by side on paper so you can see the difference in glass packages, frame materials, and warranty terms before you spend a dollar. For impact-rated work on the east side, we also quote PGT and CGI. Our shop keeps common replacement parts stocked for faster turnaround on repair calls across Garland, and we don’t push a brand because the margin is better. We quote what fits the house and the budget honestly.
Common Sliding & Patio Doors Problems We See in Garland Homes
- Corroded aluminum frames binding the track. Decades of North Texas hail and humidity eat into the old aluminum frames on 1960s and 1970s Garland sliders. The track bows, the rollers wear flat, and the door starts taking muscle to open. By the time you feel that, full-frame replacement is usually cheaper than chasing individual parts.
- Fogged glass on post-2015 rebuilds. Homes rebuilt after the December 2015 tornado often got insurance-driven minimum-code windows and doors. Those insulated glass units are now hitting the end of their seal life. We see fogged, argon-depleted panes on houses that aren’t even ten years old, especially where the summer heat and February freezes swing the thermal load hard.
- Air leaks from original single-pane sliders. The untouched original sliders on Garland’s ranch homes lost their weatherstripping decades ago. The gap lets air pass through whether the door is “closed” or not, and any U-factor or SHGC rating on paper means nothing when the actual door leaks like a screen.
- Water intrusion at the threshold. North Texas storms drive rain sideways. On older Garland sliders, the threshold flashing was often just a bead of caulk that failed long ago. We fix this properly with new flashing, not another bead of caulk over rot.
Pricing for Sliding & Patio Doors in Garland, TX
A roller, track, and latch repair on an existing slider in Garland typically runs $180 to $450. A Window Installation - Garland full-frame replacement with a mid-range vinyl slider lands between $2,800 and $5,200 on most Garland ranch homes. High-end panoramic systems with custom glass, low-E coating, and argon fill start around $7,500 and can run $18,000 or more depending on panel count and frame material. Impact-rated doors for the east-side rebuild zones add $1,800 to $4,500 over the base door price. We also offer a free written repair estimate, a maintenance check, and a permanent 5% discount for seniors and veterans. Call (888) 635-0804 and we’ll put the numbers in writing before any work is scheduled.
We Also Serve Cities Near Garland
Our crews work the surrounding suburbs every week. If you’re just outside Garland, we regularly serve Sliding & Patio Doors in Garland neighbors in Rowlett, Richardson, Mesquite, and Plano. Same standards, same warranty, same crew.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Garland
The December 26, 2015 EF4 tornado cut through the 75040, 75044, and 75043 ZIP codes near the Firewheel corridor, and the rebuild created a split market. One house on the street may have a 2016 insurance-match slider at minimum code spec while the house next door still has its original 1972 aluminum unit. That means two things for homeowners: first, insurance-match doors from the rebuild era are now failing seals and need glass replacement sooner than normal; second, the same street can need a budget repair on one side and a full custom architectural job on the other. We’ve handled both in a single afternoon. Call (888) 635-0804 and we’ll give you an honest read on which category your home falls into.
Because the original aluminum frames from the 1960s and 1970s are corroded, warped, or twisted from fifty years of North Texas hail and thermal cycling. A retrofit insert only works when the existing frame is still square and sound. On most original Garland sliders, it isn’t. Full-frame replacement lets us install a properly flashed, sealed, and squared door that will actually perform, and it’s often the only way to bring the opening up to current energy code.
Yes. The ranch homes in Garland’s older neighborhoods have a specific look: shallow-pitched roofs, brick or horizontal siding, and clean sightlines. We don’t drop a contemporary black-framed slider into a mid-century ranch unless that’s what you want. We can match the original trim profile, stain color, and hardware finish, or work with your designer to bridge old and new. If you’re coordinating with an architect on a larger remodel, we coordinate directly with them on specs and lead times so the door doesn’t hold up the job.
Most panoramic systems in Garland run four to eight weeks from signed contract to install, and the lead time is driven by the manufacturer’s production schedule, not our crew’s availability. Glass size, frame finish, and impact-rating requirements all add time. The price is fixed in writing before the order goes in, so a longer lead time doesn’t mean a bigger bill. If you’re planning around a specific season or an event, call (888) 635-0804 early and we’ll map the schedule backward from your date.
Yes. Rebuild homes met post-2015 code, which means impact-rated or at least code-compliant glazing was installed. But many of those doors were built to minimum spec under insurance pressure, and they’re now showing early seal failure and fogging. Untouched 1960s homes are usually still running single-pane aluminum that leaks air and binds. Neither one gets a standard off-the-shelf treatment: the rebuild needs a glass package worth keeping, and the original needs full-frame replacement. We assess both on site and quote accordingly.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Garland since 2008.