Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Melbourne
Melbourne sits between two bodies of water, and that single fact shapes every sliding door decision a homeowner here will ever make. The Atlantic throws salt fog from the east. The Indian River Lagoon pushes brackish condensation from the west. A house in Melbourne doesn’t need to be beachfront to watch aluminum patio door frames pit, corrode, and seize within fifteen to twenty years. TruePane Windows & Doors has been replacing those failing doors with impact-rated units that hold up to Brevard County’s wind-load requirements and dual salt-air exposure. If you’re in Melbourne and your sliding door binds, leaks, or won’t lock, call (888) 635-0804 for a free in-home measure and written quote.
Why TruePane Windows & Doors Is Melbourne’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 on a rule that still governs every job: if the pane is not true, the job is not done. That standard matters more in Melbourne than in most Florida markets. We’re the company that knows a 1960s concrete-block ranch in the 32901 ZIP usually hides corroded jamb anchors behind a trim plate, and we quote for that before the first hammer-drill comes out. Homeowners near the Eau Gallie Causeway, along Wickham Road, and in the older neighborhoods south of New Haven Avenue have dealt with sliding doors that seized mid-track because salt air from two directions ate the rollers. We build our Melbourne quotes around that reality, not around a generic door swap.
A live person answers our phone twenty-four hours a day. Not a voicemail tree, not a regional call center. When a Melbourne homeowner calls at seven in the evening because a patio door won’t lock before a storm, someone on our team picks up. We schedule free estimates across Melbourne, and our background-checked, uniformed technicians measure every opening twice before we put anything on paper. The quote shows manufacturer lines side by side so you see exactly what you’re buying.
Our Sliding & Patio Doors Services in Melbourne
Impact Sliding Glass Doors
An impact-rated sliding glass door in Melbourne is not an upgrade. It’s the legal minimum for any permitted replacement in Brevard County’s 130+ mph wind zones. We install Miami-Dade NOA and Florida Product Approval units from PGT, CGI, ES Windows, and other authorized lines, with design pressures matched to the specific opening, never a generic rating slapped onto any home. For Melbourne’s concrete-block construction, the install details matter as much as the glass. Our Sliding & Patio Doors team anchors these units into solid block with stainless steel hardware rated for salt-air exposure on both the lagoon and ocean sides of the city.
Sliding Glass Door Replacement
Replacing a sliding glass door in a 1960s Melbourne ranch usually means more than pulling the old frame. Original aluminum jalousie and slider frames oxidize and bond into concrete block rough openings over decades. The extraction often requires hammer-drilling the old anchors out, repointing the masonry, and squaring the opening before a new unit can even be measured accurately. We build that scope into pre-1980 quotes in Melbourne so there’s no surprise line item when the door comes out. If you’re in a home built during the Space Race boom, expect this conversation. We have it every week across the 32901 ZIP.
Impact French Patio Doors
For Melbourne homeowners who want a wide opening without giving up storm protection, impact French patio doors give you the swing of a traditional door with laminated glass rated for wind-borne debris. These work well in concrete-block homes where a sliding track may have already failed or where the rough opening suits a hinged configuration. We size them to the existing block opening whenever possible, but we won’t force a French door into a rough opening that needs a slider. The wall decides. We just translate it.
Screen Door Installation
Melbourne’s salt air is rough on screen door frames too. The original aluminum screens on many 1960s homes have corroded where they meet the threshold, and the result is a door that drags or won’t latch. We install screen doors with powder-coated frames and stainless hardware so the salt air doesn’t win the rematch in five years. It’s a smaller job, but it has to be done right or the door binds by the second summer.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Melbourne
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Melbourne’s coastal conditions we steer most homeowners toward PGT, CGI, and ES Windows impact units with stainless steel rollers and marine-grade hardware. We also service and install Eco Window Systems and Mr-Glass products where the opening and budget make sense. We don’t push one brand. We quote side by side on paper so you can compare what each unit actually costs and what each warranty covers. Both warranty layers get registered in writing before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every job we do in Melbourne.
Common Sliding & Patio Doors Problems We See in Melbourne Homes
- Seized aluminum tracks on lagoon-side homes. Brackish condensation from the Indian River Lagoon pits aluminum roller tracks on houses miles from the beach. Homeowners on the west side of Melbourne often discover the problem only when the door won’t budge and the rollers have welded into the frame.
- Welded corner joints failing at the header. Original 1960s sliders were built with welded aluminum corners that were never engineered for Brevard County’s 130+ mph design pressure. Repeated hurricane wind gusts stress those corners until the header joint lets go.
- Corroded locking hardware. Older patio doors in Melbourne often reach a point where the lock body has corroded from salt air and the door cannot be secured from inside. That becomes a single-point failure during an evacuation order, when homeowners need the home sealed against wind-driven rain.
- Bonded jamb anchors in concrete-block openings. On pre-1980 homes, the original aluminum frame anchors have oxidized and chemically bonded into the masonry. Extraction means hammer-drilling and repointing the block. This is routine for us in the 32901 ZIP, but it would stop a crew used to wood-frame construction in Orlando cold.
Pricing for Sliding & Patio Doors in Melbourne, FL
What Sliding & Patio Doors Costs in Melbourne
Impact sliding glass doors in Melbourne generally run $800 to $1,500 per unit for standard openings, installed. Impact single-hung windows run $900 to $1,800. Large or custom sliding door openings run $2,500 to $5,000. Whole-home packages across a 1960s ranch often land between $8,000 and $25,000 and up. What moves the price in Melbourne is the masonry. Concrete-block rough openings almost always need some degree of anchoring work, and that’s a line item a wood-frame market quote would never include. Floor height matters too, as upper-story openings catch more wind load and may need higher design pressures. Frame material and glass lite count move the number, but the block work is the Melbourne variable. A free in-home measure from TruePane gives you an exact written price.
Florida Pays You Back
Melbourne homeowners can stack several programs to offset the cost of impact sliding doors. My Safe Florida Home matching grants cover up to $10,000 for qualifying wind-mitigation upgrades for eligible homeowners. Florida waives sales tax on impact-resistant windows and doors. The federal 25C energy credit covers 30% of product cost, up to $600 per year on qualifying units. After a wind-mitigation inspection, which runs $75 to $150, many homeowners see windstorm premium credits averaging around 25% on the windstorm portion of their policy. Those are real numbers, but the programs and carriers set the final figures, so we’ll point you to them and let the paperwork land where it lands. Impact windows also beat hurricane shutters for permanent protection: no panels to haul out and hang at two in the morning when a storm shifts toward Brevard County.
We Also Serve Cities Near Melbourne
Our crews work throughout the Space Coast and Central Florida. If you’re in Kissimmee, Orlando, Lakeland, or Daytona Beach, we bring the same concrete-block expertise and impact-rated product knowledge to your project. A big-box retail install won’t pull a seized 1960s slider out of a masonry opening and repoint the block before the new unit goes in. We will. See our Melbourne page for local details, or call (888) 635-0804 to schedule a free estimate anywhere in our service area.
Serving Melbourne, FL - Our Local Coverage Area
We’re based in the Melbourne area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Melbourne
Why does my Melbourne patio door quote include masonry work like hammer-drilling and repointing when the replacement is just a door?
Because on most pre-1980 concrete-block homes in Melbourne, the original aluminum jalousie or slider frame has oxidized and chemically bonded into the masonry rough opening, so pulling it destroys the block face and requires repointing before a new impact unit can be seated. A quote that omits this work is guessing. Call (888) 635-0804 and we’ll show you what’s behind your trim plate before we price it.
What is the difference between a Miami-Dade NOA and a Florida Product Approval for impact sliding doors in Melbourne?
A Miami-Dade NOA is the stricter of the two protocols, tested to the Miami-Dade County building code standards, and it carries weight everywhere in Florida including Melbourne. A Florida Product Approval is the statewide baseline that meets code for most of Brevard County. For Melbourne’s dual salt-air exposure, we generally specify NOA-rated units from PGT or CGI when the opening faces the ocean or sits within a mile of the lagoon.
Can I replace just the sliding glass door panel and keep my existing frame in a Melbourne condo?
Rarely. If the frame is aluminum from the 1960s or 1970s and shows pitting from salt air, the rollers and track have likely worn to the point that a new panel would still bind. In a concrete-block condo, the frame is often embedded in masonry, so a panel-only swap might last a season or two before the corrosion catches up. Call (888) 635-0804 and we’ll tell you straight whether the frame is worth keeping.
How does salt air from the Indian River Lagoon side of Melbourne wear out a patio door differently than beachfront salt from the Atlantic?
Lagoon-side corrosion is slower but more insidious. The brackish condensation off the Indian River sits on hardware and doesn’t drain or dry the way ocean salt fog does after a sea breeze, so it leaches into roller housings, lock bodies, and jamb anchors on homes miles from the actual beach. Atlantic salt fog is harsher but more intermittent, and doors facing the ocean often show it first at the bottom track and the header corner. Either way, aluminum from the 1960s loses.
What is a mid-priced patio door that meets Brevard County wind-load rules and won’t corrode in five years?
A PGT 570 Series impact sliding glass door with stainless steel rollers and a Miami-Dade NOA is the mid-priced standard we install most often in Melbourne, typically running $1,200 to $2,500 installed depending on opening size and block condition. It’s not the cheapest unit on paper, but a cheap aluminum-frame door on a lagoon-side home in Melbourne will need replacement again inside a decade. Call (888) 635-0804 for a written side-by-side quote so you can see the real numbers.
Written by Dale Kessler, Owner at TruePane Windows & Doors.