Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Pasadena
Sliding and patio door replacement in Pasadena isn’t a simple swap job. For most homes here – especially the Craftsman bungalows and Spanish Revival houses built between 1900 and 1940 – it means navigating Design Review approval, matching period-correct profiles, and specifying glazing that can hold up to 100°F summer afternoons. We know that because we’ve worked these streets, from Bungalow Heaven to the foothill neighborhoods near the San Gabriels. If you’re looking for a door that opens clean, seals tight, and won’t get rejected by the city’s preservation staff, call us at (888) 635-0804. We’ll measure, quote, and handle the paperwork – done right the first time.
Why TruePane Windows & Doors Is Pasadena’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 on a rule he keeps on the whiteboard to this day: if the pane is not true, the job is not done. That standard matters more in Pasadena than almost anywhere in the LA metro. The housing stock is older, the preservation requirements are stricter, and the heat loads on east- and west-facing glass are punishing. Our Sliding & Patio Doors team has been through the Design Review process enough times to know what gets approved and what gets sent back.
More than a dozen manufacturer lines are available through us – including PGT, CGI, and ES Windows – which means we don’t push a single brand. We quote side by side on paper so you see exactly what you’re buying. Every job carries the Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before our truck leaves your driveway. A live person answers our phone 24 hours a day, seven days a week. Not a voicemail tree. Not a callback form. A person.
When we say we’ll be there, we mean it. Background-checked, uniformed technicians measure every opening twice. No-hassle upfront pricing. Most jobs completed in a single visit.
Our Sliding & Patio Doors Services in Pasadena
Patio Sliding Doors
A well-built sliding patio door should glide on its track with one hand and seal tight against the Pasadena summer. The older homes here often have original single-pane sliders with mortised wood frames that have warped, rotted, or lost their seal. We remove those carefully, flash the opening properly, and install a door that matches your home’s era while meeting current Title 24 energy standards. Low-E glass is the baseline for any door we put on an east- or west-facing wall in Pasadena.

Panoramic Sliding Systems
For homeowners opening a rear elevation to a garden or patio, panoramic sliders create a wall of glass that stacks or pockets away entirely. In Pasadena’s historic districts, these systems require extra care – the Design Review board wants to see that the new opening respects the original massing and sightlines of the house. We coordinate that paperwork and often specify aluminum-clad wood with true divided lights to satisfy both the board and the energy code. Lead times on panoramic systems run longer than standard sliders, so we order early and fix the price in writing before the order goes to the manufacturer.

Heavy-Duty Sliding Doors
Large glass panels weigh hundreds of pounds. In the foothill neighborhoods of northern Pasadena, heavy-duty hardware also has to stand up to high winds and fire-code requirements. We install reinforced tracks, stainless steel rollers, and tempered or fire-rated glass where the Very High Fire Hazard Severity Zone designation applies. These are not tract-home doors. They’re engineered assemblies, and they need a crew that understands both the mechanics and the local code path.

Pocket & Barn Doors
Pocket doors disappear into the wall – a classic solution for Pasadena bungalows where floor space is tight and the original framing layout doesn’t allow a swinging door. The retrofitting process is invasive: we open the wall cavity, reframe, and often reinforce the header. Barn doors ride on exposed hardware and work well in later additions or transitional spaces. Both options mean custom hardware, and that means selecting finishes that feel right in a 1920s house, not a showroom catalog.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Pasadena
We’re an authorized installer for PGT, CGI, CWS, and ES Windows, among others. Pasadena homeowners often come to us because a previous contractor sold them a vinyl slider that failed Design Review, or because the door they bought fogged between the panes within five years and the warranty was never registered. With PGT and CGI, we register both warranty layers in writing before we leave the driveway. With ES Windows and CWS, we quote on paper next to other lines so you can compare frame material, glazing, and price line by line. We order parts direct from the manufacturer, which keeps turnaround faster for Pasadena customers than a shop that has to source through a distributor.
Common Sliding & Patio Doors Problems We See in Pasadena Homes
- Design Review rejections: A standard vinyl sliding door with simulated divided lights will be automatically rejected by Pasadena’s Historic Preservation staff in landmark districts. The board requires wood or aluminum-clad wood doors with true divided lights and sash dimensions that match the original Craftsman profile on file. We’ve seen homeowners lose weeks and re-order doors because their contractor didn’t know this.
- Solar heat gain through east- and west-facing sliders: Pasadena regularly hits over 100°F in the summer. A clear-glass sliding door on a west-facing patio wall turns that room into an oven. We specify low-E, argon-filled insulated glass units as the minimum standard for any door we install here – not as an upgrade.
- Fire-code compliance in the foothills: The northern neighborhoods fall inside California’s Very High Fire Hazard Severity Zone. That means unrated glass and combustible door frames fail inspection. We follow the code and recommend tempered or fire-rated glazing and non-combustible frame materials where the wildland-urban interface applies.
- Fogged or failed seals in original doors: Pasadena’s early 20th-century houses often still have their original single-pane wood sliding doors. The seals fail, the glass fogs, and the door binds in July. Repairs are usually temporary. A replacement matched to the original Craftsman profile solves the problem permanently.
Pricing for Sliding & Patio Doors in Pasadena, TX
Let’s be straight about what this costs in Pasadena. A basic patio sliding door replacement – single panel, standard size, aluminum or vinyl frame where no Design Review applies – typically runs $1,800 to $3,200 installed. A heavy-duty slider with reinforced hardware runs $3,500 to $5,500. A panoramic sliding system, which is a multi-panel wall of glass, starts around $8,000 and can exceed $20,000 depending on panel count and glass type. In a historic district, expect to add 30 to 50 percent for wood or clad-wood construction with true divided lights, plus whatever Design Review approval requires.
What drives the price up in Pasadena’s landmark districts is the matched profile work. A Marvin clad-wood slider with true divided lights and low-E glass runs $4,500 to $7,500 on average. The same opening with a PGT or CGI door runs $3,800 to $6,200. The older the house, the more likely the rough opening needs reframing, flashing, and rot repair before the new door goes in. We give you a fixed price in writing – no surprises on the bill – and we hold it. That’s the square deal, and it’s how we’ve always done it.
Call (888) 635-0804 and we’ll come measure. The estimate is free.
We Also Serve Cities Near Pasadena
We work throughout the Houston metro from our local dispatch in Pasadena. Our sliding and patio door service covers Pasadena and the surrounding communities, including Deer Park, La Porte, Friendswood, and Channelview. If you’re in one of those areas and need a door measured, quoted, or repaired, call us. The same crew, the same standard.
Serving Pasadena, TX - Our Local Coverage Area
We’re based in the Pasadena area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Pasadena
Yes. Bungalow Heaven is a designated Historic Landmark District, and any exterior alteration – including sliding and patio door replacement – must go through the city’s Design Review process. Standard vinyl units with simulated divided lights will be rejected. The board requires wood or aluminum-clad wood doors with true divided lights and sash dimensions that match the original Craftsman profile. Plan for the approval timeline before you order anything. Call (888) 635-0804 and we’ll walk you through it.
Low-E, argon-filled insulated glass units are the minimum we recommend for any east- or west-facing sliding door in Pasadena. Summer temperatures here routinely exceed 100°F, and clear glass turns those rooms into heat traps. Low-E coatings cut solar heat gain significantly while still letting in natural light. In landmark districts, we specify true divided lights over the low-E glass so the door meets both the Design Review board and Title 24. For an exact quote on your opening, call us at (888) 635-0804.
Yes. The northern foothill neighborhoods of Pasadena fall within California’s designated Very High Fire Hazard Severity Zone. Sliding doors in those areas must meet fire-code standards for glazing and frame materials. Unrated glass and combustible frames fail inspection. We specify tempered or fire-rated glass and non-combustible frame materials where the zone applies. If you’re not sure whether your house is in the zone, call (888) 635-0804 and we’ll check the map for your address.
Fogging between the panes means the insulated glass unit’s seal has failed. Repairs are usually temporary – a glass company can replace just the IGU if the frame is still solid, but on a 100-year-old Pasadena door with a rotted mortised jamb, the fix won’t hold. We’ll tell you straight: if the frame is sound, we replace the glass. If the frame is failing, we replace the door. The estimate is free. Call (888) 635-0804.
For a standard patio slider with no Design Review, most jobs are done in a single visit – usually four to six hours on site. For a custom door in a landmark district, the realistic timeline is six to twelve weeks. The Design Review process alone can take two to four weeks depending on the board’s calendar. Then the manufacturer’s lead time kicks in – and for a clad-wood door with true divided lights, that’s often four to six weeks before the door even ships. We order early, we fix the price in writing before the order goes in, and we’ll give you a straight answer on the schedule before we start. Call (888) 635-0804 to get a date on the calendar.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Pasadena and the surrounding Houston metro since 2008.



Before
After
Before
After
Before
After