Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterWindow Installation in Palm Beach: What It Costs and What Actually Lasts
Window installation in Palm Beach runs $800 to $1,800 per window for impact-rated units, with the median job landing around $1,100 per opening once you factor in the island’s ARCOM review requirements and coastal wind zone. Large custom openings on Mizner-era estates typically run $2,500 to $5,000 each, and whole-home replacement packages on Palm Beach’s roughly 3,000 residences generally land between $8,000 and $25,000 depending on opening count and framing conditions. The salt air here decides what survives, so we specify marine-grade hardware and slim-profile impact frames that clear both Florida’s HVHZ code and the island’s Architectural Commission review. Call (888) 635-0804 for a free in-home measure and a written quote, side by side by manufacturer line.
Salt Air, ARCOM, and the Palm Beach Window Problem
Palm Beach sits on a narrow Atlantic barrier island. East-facing elevations take direct salt spray, and untreated aluminum frames begin pitting within three to five seasons. The pitting swells the jamb, the sash binds, the weatherstripping tears. By year five or six, the window won’t open without a fight. By year eight, the customer’s paying for a full replacement and wondering why the “impact rated” window they bought in 2018 didn’t make it to 2025. The answer’s usually the finish and the frame profile, not the glass.
That’s the first failure. The second one only exists on this island. In the Town of Palm Beach’s ARCOM district, a replacement window that clears Florida’s HVHZ impact code can still be rejected for having a frame 3/16 inch too wide to match the original Mizner-era steel casement sightline. That’s a dual compliance burden that does not exist in West Palm Beach or Boca Raton. Mainland installers learn about it the hard way, usually after the homeowner has already paid a deposit and waited four months for a submittal that gets bounced. We keep slim-profile fiberglass and thermally broken aluminum impact lines in our catalog specifically to clear that aesthetic review. If you’re replacing windows on a landmarked or contributing structure in Palm Beach, the frame width matters as much as the wind rating.
Fast, Reliable Window Installation Across Palm Beach
We’ve worked Palm Beach’s 33480 zip code long enough to know that schedule promises mean nothing if the first submittal fails. Our Window Installation team reviews ARCOM’s sightline requirements before we order anything, so a client on South County Road doesn’t lose two months to a reorder. That’s the practical difference between a crew that works the island regularly and one that drives over the bridge occasionally. Dispatch for Palm Beach jobs is coordinated from our South FL office, and crews are on the island most weeks. Call (888) 635-0804 and a live person answers. No voicemail tree.
Why TruePane Windows & Doors Is Palm Beach’s Preferred Window Installation Company
We treat this island’s housing stock as what it is: a collection of Addison Mizner-designed Mediterranean Revival estates and Spanish Colonial homes built between the 1920s and 1940s, many with original steel casements or old-growth wood windows. Replacing those windows isn’t a swap. It’s a custom-profile exercise governed by the Landmarks Preservation Commission and ARCOM, and it rewards a company that has done it before.
Palm Beach customers come to us on referral more often than through ads. The reason is simple: we register both manufacturer warranty layers in writing before the truck leaves the driveway, we put the durations on paper, and we back the workmanship with a Done Right Promise. No paperwork fights. No arguing about who’s responsible for a fogged seal. If it’s not done right, we make it right. Dale Kessler founded this company in 2008 on one rule: if the pane is not true, the job is not done. We’ve held to it through years of combined trade heritage.
Our technicians are background-checked, uniformed, and trained to measure every opening twice. They quote manufacturer lines side by side on paper. You see exactly what you’re buying and what it costs before you commit. Seniors and veterans get a permanent 5% discount. Everyone gets a square deal.
Our Window Installation Services in Palm Beach
Casement Windows
Casement windows are the most common replacement on Palm Beach’s Mizner-era homes because the original steel casements that Addison Mizner specified are what ARCOM expects to see. We install impact-rated casements from CGI and PGT with sightlines as narrow as 1-1/16 inches, matching the original profiles closely enough to clear review. On a 1930s Mediterranean Revival estate off South County Road, our crew replaced a row of corroded steel casements with thermally broken aluminum impact units after the first mainland submittal was rejected by ARCOM for a 1-1/4 inch profile. We used CGI’s slim-line casement with a Miami-Dade NOA and laminated glass interlayer, then finished the exterior with a marine-grade coating so the east-facing ocean elevation won’t pit again in five seasons.
Picture & Fixed Windows
Palladian profiles and arched openings dominate Palm Beach’s estate architecture. Picture and fixed windows in those openings need to be fabricated to the existing arch, not squeezed into stock rectangular frames. We order custom impact units with laminated glass rated for the wind zone, then set them so the sightlines match the original wood or steel work. Fixed windows on loggia elevations take more salt than any other part of the house, so we specify non-corrosive hardware and marine-grade finishes on every east-facing opening.
3-Panel Sliding (3-Lite Roller) Windows
Loggia doors and wide gallery openings in Palm Beach often call for 3-panel sliding windows or 3-lite roller configurations. The tracks are where salt air does its worst work. We install stainless and hot-dip components, not the zinc-plated hardware that mainland suppliers default to. In Palm Beach, that’s not a premium. It’s the only spec that survives. Our 3-panel sliders glide on sealed tracks rated for continuous coastal exposure, and the frames carry Florida Product Approval numbers we can show you in writing.
Single & Double Hung Windows
Single and double hung units show up in Palm Beach on service quarters, guest houses, and the occasional mid-century build along the Lake Trail. These installations run $900 to $1,800 per opening for impact single-hung, depending on size and wind-zone requirements. We install them the same way we install everything on this island: measured twice, leveled true, sealed against driving rain, and registered with both warranty layers before we leave.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Palm Beach
We’re an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, Mr-Glass, ViewLux, and Therma-Tru. That matters in Palm Beach because ARCOM submittals don’t get approved on brand reputation alone. They get approved on the specific product specification: frame profile, sightline width, glass interlayer, NOA number. We keep current spec sheets for the lines we install, and we know which ones clear the island’s aesthetic review. When a Palm Beach homeowner calls about a Mr-Glass casement or a PGT 3-panel slider, we can quote the exact configuration that passes, not a substitute that might.
Common Window Installation Problems We See in Palm Beach Homes
- Oxidized aluminum frames on ocean-side elevations. Untreated aluminum pits within three to five years of direct salt exposure. The oxidation swells the jamb, the sash binds, the weatherstripping shreds. By the time it’s visible, the frame’s compromised and the window needs full replacement, not repair.
- ARCOM submittal rejections on landmarked homes. Standard impact windows carry frames 1-1/4 inches wide or thicker. The original Crittall steel sightlines on Mizner-era casements run closer to 1-1/16 inches. ARCOM’s rejected more than one mainland submittal over that 3/16 inch difference. Reorder delay: four to six months, minimum.
- Non-HVHZ units flagged at wind-mitigation inspection. A window that meets Miami-Dade code but lacks the right HVHZ rating for this wind zone gets flagged. The insurance credit evaporates. In the worst cases, the homeowner pays for a second full replacement. We spec the right rating the first time.
- Salt-damaged window tracks and hardware on loggia and pool elevations. Zinc-plated rollers and tracks corrode fast in Palm Beach’s coastal air. Within two or three years, the panel sticks or jumps the rail. We install stainless and hot-dip hardware, and we coat exposed finishes with marine-grade sealant.
Pricing for Window Installation in Palm Beach, FL
A typical impact casement window in Palm Beach runs $1,100 to $1,800 installed. Single and double hung impact units land between $900 and $1,800. Large custom openings, arched Palladian profiles, and bay configurations with structural headers push to $2,500-$5,000. Whole-home packages on this island generally start around $8,000 and run upward from there, depending on opening count, floor height, and whether ARCOM review applies to the structure. Frame material drives the price more than labor: slim-profile thermally broken aluminum and fiberglass cost more than standard aluminum, but they’re the difference between passing review and paying for a second submittal. We provide free in-home measures and written line-item quotes. No change orders, no surprise charges. Call (888) 635-0804 to schedule yours.
What Window Installation Costs in Palm Beach
Impact windows in Palm Beach run $800 to $1,500 per window installed at the base level. Impact single-hung units run $900 to $1,800, and large or custom openings on estate homes run $2,500 to $5,000 each. Whole-home packages for the island’s larger residences land between $8,000 and $25,000+ depending on how many openings you have and what the existing framing requires.
What moves the price in Palm Beach specifically: opening count, wind zone by elevation, floor height above grade, and whether the home carries landmark or contributing-structure designation. ARCOM-submittal projects cost more because every product has to clear aesthetic review, and the window has to be ordered to the exact profile. A standard impact unit off a mainland shelf won’t pass on many of these homes. Floor height matters too: upper-story installations on ocean-side elevations require higher design pressures, which means heavier laminated glass, which means more cost.
We measure every opening on site, quote manufacturer lines side by side in writing, and register both warranty layers before the truck leaves the driveway. Free in-home measure. Written quote. No surprises on the bill.
Florida Pays You Back
Florida’s incentives stack, and Palm Beach homeowners can use them on a single window project. The My Safe Florida Home program offers matching grants up to $10,000 for qualifying wind-mitigation upgrades including impact-rated windows and doors. Florida also exempts impact-resistant windows and doors from sales tax, which saves about 6% to 7% on the product portion of the job. On the federal side, the 25C energy credit returns 30% of the product cost on qualifying energy-efficient units, up to $600 per year. And after a wind-mitigation inspection ($75 to $150 in this market), many carriers reduce the windstorm portion of the premium by an average of around 25%. No guarantees; each program and insurer sets its own final numbers. But the stack is real, and we’ll point you to the paperwork.
Impact Windows vs. Hurricane Shutters in Palm Beach
Shutters protect the glass but only if someone’s home to hang them. On a barrier island where evacuation orders come fast, that’s a real gap. Impact windows protect the envelope permanently. The laminated glass stays in place under wind-borne debris, the frame’s rated for the design pressure, and there’s no hardware to store or panels to muscle into place before a storm. For Palm Beach homeowners who travel in summer, the permanent option is the practical one. The trade-off is upfront cost: impact windows run higher than shutters per opening. But the insurance credit applies year-round, the sales-tax exemption applies at purchase, and there’s no season when the window isn’t doing its job. We can walk you through both, but for this island, we recommend impact-rated glazing on any elevation that faces the ocean.
We Also Serve Cities Near Palm Beach
TruePane crews serve Window Installation in Palm Beach and the surrounding communities: West Palm Beach, North Palm Beach, Greenacres, and Lake Worth. If you’re just across the bridge in West Palm Beach, the same crew that works the island can measure, quote, and install. Call (888) 635-0804 and we’ll schedule around your calendar.
Serving Palm Beach, FL - Our Local Coverage Area
We’re based in the Palm Beach area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Installation in Palm Beach
Yes. If you’re replacing windows on a designated historic or contributing structure in Palm Beach, you need impact-rated glazing that meets Florida Building Code wind-borne debris provisions, and you also need ARCOM approval on the replacement design, including frame profile and sightline width. The two requirements apply simultaneously, and they often conflict. That’s why we stock slim-profile fiberglass and thermally broken aluminum impact units specifically for this island. Call (888) 635-0804 for a free in-home measure.
ARCOM doesn’t approve brands. It approves specific product configurations. What passes is a unit with a sightline that matches or closely approximates the original 1920s-30s steel casement profile, typically around 1-1/16 inches, plus a Miami-Dade NOA and HVHZ rating. CGI’s slim-line casement, certain PGT configurations, and select ViewLux and Mr-Glass profiles have cleared review on Palm Beach projects when specified with the right frame width and finish. The brand matters less than the exact model and sightline. We quote the configuration, not just the manufacturer name.
Salt-air failure shows as white or gray pitting on the frame, usually concentrated on the lower rail and the side facing the ocean. The pitting feels rough, like sandpaper, and the sash starts binding in the jamb where the oxidation has swollen the metal. Age failure looks different: it’s more even, the hardware wears, the glass seal fails and fogs. If you’re seeing pitting on east-facing elevations, it’s salt. In that case, replacing with a marine-grade finished frame is the only repair that lasts. Call (888) 635-0804 and we’ll inspect it free.
ARCOM compliance adds cost. On the island, many homes require custom profiles, narrower sightlines, and specific frame finishes that standard mainland inventory doesn’t carry. Add marine-grade coatings and stainless hardware for salt exposure, plus the time required to prepare and submit ARCOM documentation, and the same brand of window runs 15% to 25% higher here than a comparable install across the bridge. If the quote you’re comparing doesn’t include ARCOM submittal work, it’s not a Palm Beach quote. That’s the honest answer, and it’s why our written quotes itemize the compliance work so you can see exactly what you’re paying for.
Yes, measurably. Low-E insulated impact glass cuts solar heat gain far more than single-pane or clear laminated glass, and Palm Beach’s cooling season runs hot from April through November. You’ll notice the difference most on west-facing and loggia elevations that catch afternoon sun. The energy savings won’t offset the full cost of the windows in five years, but combined with the 25C federal credit and the windstorm premium reduction, the math improves. We quote Low-E configurations from multiple manufacturers side by side so you can see the efficiency ratings and the price gap.
Written by Dale Kessler, Owner at TruePane Windows & Doors. We measure every Palm Beach opening twice, register both warranty layers in writing, and stand behind the work with a Done Right Promise. Call (888) 635-0804 for a free in-home estimate.