Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Window Replacement Across Gilroy
Window replacement in Gilroy, CA typically runs $550-$1,400 per opening for vinyl insert work, and $950-$2,100 per opening for full-frame replacement, depending on the condition of the rough opening and what our crew finds once the old unit comes out. Most jobs in the 95020 zip code are completed in a single visit, and we schedule free estimates across Gilroy, from the downtown corridors near Monterey Road to the east-side tract neighborhoods. If you’re watching fog form between panes on a 100°F afternoon, call (888) 635-0804 and we’ll send a background-checked, uniformed technician to measure every opening twice and walk you through the quote on paper.
Why TruePane Windows & Doors Is Gilroy’s Preferred Window Replacement Company
TruePane Windows & Doors was founded by second-generation glazier Dale Kessler in 2008, built on a rule that still hangs in our shop: if the pane is not true, the job is not done. We’re not a franchise operation working out of a regional playbook. We hire local, train apprentices into journeymen, and run our Gilroy scheduling and dispatch from our San Francisco Bay Area office. That means the team that shows up at your house answers to the same person who measured the opening, not a rotating cast of subcontractors.
Our window replacement crews know what Gilroy’s climate does to windows. We’ve pulled more than our share of failed seal units out of 1980s aluminum frames on the east side, and we understand that a window spec that works in coastal Watsonville will not hold up to the sustained afternoon wind and triple-digit UV load that comes through the Gilroy gap in the Coast Ranges. That local knowledge shows up in how we quote, how we shim, and how we flash every rough opening before the new unit goes in.
Every Gilroy job carries our Done Right Promise and The Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, before the truck leaves your driveway. A live person answers our phones 24 hours a day, seven days a week. When you call about a sticking door or a fogged pane in Gilroy, you get a person, not a voicemail tree. We also offer a permanent 5% discount for seniors and veterans, which we’re happy to apply when we write your quote.
For a broader view of how we approach window replacement: our Window Replacement team works the same way on every house: measure twice, quote both manufacturer lines side by side on paper, and register both warranty layers before we leave the driveway.
Our Window Replacement Services in Gilroy
Full Frame Replacement
This is the work we do most often on Gilroy’s older housing stock, particularly the east-side tract neighborhoods built out in the 1980s and 1990s. Full-frame replacement means pulling the entire old window, frame and all, down to the rough opening. On a 1980s east-side tract home near Monterey Road, our crew pulled a builder-grade aluminum single-pane double-hung that had developed visible seal failure. Fog between the panes meant the insulated glass unit’s argon fill was gone. The rough opening was undersized and the original flashing tape had dried to dust, so we reframed for a fusion-welded vinyl casement with low-E glass and Argon fill, shimmed every jamb to handle the Gap’s afternoon wind load, and rewrapped the opening before trim. The homeowner later told us the room finally held temperature on 100°F days.
If your Gilroy home still has original aluminum single-pane windows from that era, there’s a good chance the flashing has failed and the framing underneath is holding moisture. We inspect before we quote, so the number on paper reflects what’s actually behind the trim. Full-frame replacement in Gilroy runs $950-$2,100 per opening.
Insert Window Replacement
When the existing frame is square, dry, and structurally sound, an insert window replacement can be the right call. We set a new, factory-built unit inside the existing frame, seal and insulate the gap, and leave the interior and exterior trim intact. This is faster than a full-frame job and costs less up front, but it only works if the rough opening and flashing are still doing their job. In Gilroy, that’s the question that matters, because the sustained afternoon wind through the Gap finds every failed piece of flashing tape and every hairline gap in a tired old frame. If our inspection shows rot or shifted framing, we’ll tell you straight, and we won’t sell you an insert that will fail in two seasons. Insert replacement typically runs $550-$1,400 per opening in Gilroy.
Storm Window Replacement
Some Gilroy homeowners keep their original wood or aluminum windows and rely on exterior storm windows for an added weather and UV barrier. We supply and install new storm window replacements, and we can match older sizing and sightlines on houses in the downtown districts where the original fenestration still reads right from the street. Storm window replacement runs $300-$700 per unit on typical Gilroy homes. If the primary window behind the storm unit has failed seals or rotted sills, we’ll flag it during the quote and show you what a combined approach would cost.
Energy-Efficient Upgrade
Gilroy’s inland valley position strips away the coastal marine layer, so triple-digit afternoons and unfiltered UV are the real test for any energy-efficient upgrade. We spec low-E coatings and Argon or Krypton gas fills sized for Gilroy’s actual thermal load, not Santa Cruz’s, on every Energy-Efficient Windows - Gilroy installation. Homeowners who upgrade from 1980s aluminum single-pane units to modern fusion-welded vinyl or composite frames typically see their cooling load drop in the upstairs bedrooms within the first full summer. Energy-efficient window replacement in Gilroy runs $750-$1,600 per opening depending on glass package and frame material, and both manufacturer warranty layers are registered in writing before we leave the driveway.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Common Window Replacement Problems We See in Gilroy Homes
- Failed insulated glass seals from the Gilroy Gap wind. The persistent afternoon wind that funnels through the Coast Ranges doesn’t just rattle hardware. It flexes sash and frame assemblies thousands of times a season. Cheap IG units lose their argon fill and start fogging years earlier here than in Morgan Hill or San Jose.
- Dry-rotted jambs and sills hiding behind failed flashing tape. On 1980s builder-grade aluminum windows, the original flashing was often a thin tape that hardens and cracks under Gilroy’s UV load. Once it fails, wind-driven moisture from the Gap’s afternoon gusts gets behind the frame and rots the wood from the inside out. By the time you see staining on the drywall, the rough opening needs real repair.
- Undersized rough openings from fast tract construction. The east-side subdivisions went up fast in the 1980s and 1990s. We routinely find rough openings that are a quarter inch or more out of square, with shims that have compressed and shifted over three decades. Insert-only installs can’t fix a twisted frame. Full-frame replacement gets everything back to true.
- Sticking doors and shifting thresholds from expansive clay soil. Gilroy’s valley floor has expansive clay that swells and shrinks with the dramatic diurnal temperature swing. Combined with the afternoon wind load through the Gap, that soil movement loosens casing fasteners and shifts sliding-glass door tracks. Doors that bind in summer and leak in winter are often a symptom of a rough opening that was never properly shimmed or flashed.
Trusted Brands We Service in Gilroy
TruePane is an authorized installer for more than a dozen manufacturer lines, including PGT, CGI, and ES Windows. For Gilroy’s climate, we regularly recommend CGI and PGT impact-rated lines on west-facing elevations that catch the full afternoon wind, and Milgard or Marvin vinyl and fiberglass options for energy-efficient full-frame retrofits on older tract homes. Because we stock common hardware, glazing, and balance parts for these lines locally, turnaround on warranty calls and seasonal adjustments for Gilroy homeowners is days, not weeks.
Pricing for Window Replacement in Gilroy, CA
Window replacement in Gilroy runs on a per-opening basis, and the ranges below reflect what we’ve quoted and completed in the 95020 zip code over the past several seasons. A standard vinyl insert replacement in a typical 1980s east-side tract home runs $550-$1,400 per opening. Full-frame replacement, which includes reframing the rough opening, new flashing, and interior and exterior trim, runs $950-$2,100 per opening. Energy-efficient upgrades with low-E and Argon-filled glass add $150-$400 per opening on top of the base frame cost. Storm window replacement runs $300-$700 per unit.
The single biggest driver of cost in Gilroy is what’s hiding behind the old window. If our inspection finds rotted jambs, failed flashing, or an undersized rough opening, that repair work is written into the quote before you sign. We don’t do change orders. We don’t surprise you with a line item after the wall is open. Every quote is fixed pricing, in writing, with both warranty layers registered before we start. Call (888) 635-0804 for a free estimate, and we’ll walk you through the numbers on paper, side by side, manufacturer against manufacturer.
We Also Serve Cities Near Gilroy
TruePane crews regularly work throughout southern Santa Clara County and into the neighboring coastal valleys. In addition to Window Replacement in Gilroy, we quote and install in San Martin, Morgan Hill, Watsonville, and Aptos. If you’re just over the ridge or off Highway 156, call (888) 635-0804 and we’ll schedule a free estimate for your home the same week.
Serving Gilroy, CA - Our Local Coverage Area
We’re based in the Gilroy area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Window Replacement in Gilroy
Because the original builder-grade aluminum windows in those homes are now 30-40 years old, and the flashing tape and rough opening framing behind them have degraded to the point where an insert would fail within two seasons. Gilroy’s afternoon wind through the Coast Ranges gap forces moisture behind failed flashing, and the valley’s expansive clay soil shifts rough openings out of square. When we pull the old unit, we routinely find dry-rotted jambs and undersized framing that cannot support a simple insert. That’s why our quotes start with inspection, not assumption. Call (888) 635-0804 for a free estimate on your Gilroy home.
The Gilroy Gap is the natural break in the Coast Ranges where marine air from Monterey Bay funnels inland. That produces persistent, strong afternoon winds that flex window sash and frame assemblies thousands of times each season. Over time, the constant cycling stresses the insulated glass unit’s perimeter seal. The seal fails, argon gas escapes, and condensation builds between the panes. It’s measurably worse in Gilroy than in Morgan Hill or San Jose because the wind load here is higher and more sustained. We spec frames and IG units built for that load. Call (888) 635-0804 to talk through what’s happening with your windows.
When full-frame replacement goes down to the rough opening, the city requires that the newly exposed opening meet current building code: proper flashing, water-resistive barrier integration, and in some cases egress sizing on bedrooms. On older Gilroy homes, we’ve also seen code triggers around tempered glass requirements near doors and low sill heights. We handle all Gilroy permits and inspections. The scope and cost of any code-required upgrade is written into your contract before we start, not discovered after the wall is open. Call (888) 635-0804 for a quote that includes the real numbers.
Yes, full-frame window replacement in Gilroy requires a permit, and TruePane pulls the permit, schedules the inspection, and stands behind the work until the city signs off. Simple insert replacements that fit within the existing frame without structural changes typically don’t trigger a permit, but if our inspection finds rot or framing issues that require reframing, we’ll file the permit and include it in the quote. We don’t cut corners on permits and we don’t leave you holding the paperwork. Call (888) 635-0804 and we’ll tell you exactly what your job requires.
In Gilroy, vinyl frames oxidize, weatherstripping hardens, and glazing compounds dry-crack noticeably faster than on the coast, because the inland valley strips away the marine layer that moderates UV and temperature. The daily thermal swing, triple-digit afternoons followed by cool Coast Range nights, subjects frames to constant expansion and contraction. A quality fusion-welded vinyl frame installed correctly in Gilroy should last 25-35 years. A cheap insert with thin wall stock on a 1980s rough opening might show seal or sash problems within five. That’s why we spec frames for Gilroy’s actual conditions. Call (888) 635-0804 for a free estimate on your home.
Getting Your Windows Replaced in Gilroy: Next Steps
Call (888) 635-0804 to schedule a free, no-pressure estimate. A live person answers 24 hours a day. We’ll send a background-checked, uniformed technician to measure every opening twice, inspect the rough opening and flashing, and walk you through a written quote with manufacturer lines compared side by side on paper. Both warranty layers get registered in writing before the truck leaves the driveway. If the pane is not true, the job is not done. That’s the standard on every Gilroy window replacement we complete.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Gilroy and the surrounding South Bay communities with window replacement and installation since 2008.