Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across Crosby
Custom windows and doors in Crosby, TX run $850-$4,800 per opening depending on size, glass package, and frame material. That’s not a guess. It’s the range we’ve quoted and installed here since the post-Harvey rebuild exposed a wave of cheap, non-impact-rated units now failing at the six-to-eight-year mark. If you live between FM 2100 and the San Jacinto River, you’ve likely already seen fogged panes, stiff sashes, or a door that binds in July. We’re TruePane Windows & Doors, and we serve Crosby with Custom Windows & Doors built for this floodplain’s humidity and wind loads, not for a catalog. Call (888) 635-0804 for a free, written estimate.
Why TruePane Windows & Doors Is Crosby’s Preferred Custom Windows & Doors Company
Crosby homeowners have learned the hard way that a window is only as good as its seal and a door only as good as its jamb. We’ve replaced enough Harvey-era patchwork on Crosby ranch houses to know exactly what fails first here: warped thresholds shimmed with scrap wood, aluminum frames oxidized soft by Ship Channel humidity, and deadbolts that won’t throw because the slab moved during the flood. Our background-checked, uniformed technicians measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before leaving your driveway. Dale Kessler founded this company on a rule that still governs every install: if the pane is not true, the job is not done.
We’re not the cheapest bid in Crosby. We’re the last call you should have to make. The Keystone Standard means both warranty layers are registered in writing, durations stated, and every job carries our Done Right Promise. If something’s off, we make it right. No paperwork fights, no fine print. A live person answers our phone 24/7, and we sponsor the same county fairs and church roof funds your family has attended for decades. We plan to be in Crosby in thirty years, because we’ve already been serving this region for over 42.
Our Custom Windows & Doors Services in Crosby
Custom Shape Windows
Arched transoms, trapezoid flankers, circular porthole units, and picture windows with radius tops are common on the 1980s-era brick ranches along FM 2100 and around Newport. The problem is that those original units were often site-glazed with aluminum stops that have since corroded against humid Gulf air, and the custom shapes make direct replacement difficult without a glazier who understands the existing rough opening. We fabricate custom geometric units to match your home’s opening precisely, then set them with marine-grade flashing tape and stainless hardware that won’t pit in Crosby’s salt-thick air. A custom arch-top window in Crosby typically runs $1,100-$3,600 installed depending on glass and frame line.
Oversized Glass Panels
The flood-rebuild boom turned a lot of Crosby living rooms into open-plan spaces with wide view walls. Those large fixed and picture units look impressive, but many were builder-grade units ordered fast and set without proper structural glazing. In Crosby’s hurricane-season wind loads funneled up Galveston Bay and the Trinity/San Jacinto corridors, an oversized pane without the right glass thickness and framing deflects, loses its seal, and eventually fails outright. We install oversized insulated glass units rated for the wind zone, using low-E argon-filled glass and reinforced frames that carry the load without bowing. An oversized fixed panel in Crosby runs $2,200-$6,800 depending on square footage and glass specification.
Architectural Grilles & SDLs
Simulated divided lites (SDLs) and real architectural grilles give Crosby’s 1970s and 1980s ranch houses the definition they originally had before vinyl replacements flattened the elevations. We see a lot of homeowners on streets off Wahl and near Drew Elementary who want period-correct window patterns back, but the big-box replacements wiped them out. We build custom SDL patterns matched to the home’s original millwork and the homeowner’s taste, applied either between the panes or as exterior true-divided lites in wood. Custom architectural grilles and SDLs on a standard window add $180-$620 per unit in Crosby, depending on the pattern and material.
Commercial Storefront Glazing
Crosby’s commercial strips along FM 2100 carry a mix of 1970s storefronts and newer rebuilds, and the older ones have aluminum frames that are heavily oxidized from decades of corridor humidity. We replace and service commercial storefront systems, entry doors, and glass panels for Crosby storefronts, including code-required tempered and impact glazing. We’re an authorized installer for more than a dozen manufacturer lines, including PGT and CGI, so we can quote impact-rated storefront alternatives without sending you to three different distributors. Storefront glazing in Crosby varies widely by lineal footage, but most storefront replacements run $90-$220 per square foot installed.
Curtain Wall Systems
For larger Crosby commercial buildings and the new medical and retail buildouts near the highway, a curtain wall system carries structural load across wide spans without intervening columns. The issue in Crosby is always the gasket and seal interface: Gulf Coast humidity, salt air, and the occasional hurricane gust stress thermal movement at every joint. We install and service curtain wall systems with movement joints calculated for the local temperature swing and sealed with high-grade silicone that keeps its elasticity after years of sun. Curtain wall installations in Crosby run $120-$280 per square foot depending on mullion spacing and glazing type.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Crosby
We’re an authorized installer for more than a dozen manufacturer lines, and we quote them side by side on paper so you can see exactly what you’re buying. For Crosby’s specific conditions, we often recommend PGT, CGI, and CWS impact-rated lines because they carry Miami-Dade approvals that cover wind zones very similar to what Crosby sees in a serious storm. Your Andersen or Pella units are not too difficult for us either; we service and replace those regularly, and our local parts stock includes many seals, balances, and hardware pieces specific to those brands. That means faster turnaround for Crosby homeowners who don’t want to wait for a distributor to order from out of state.
Common Custom Windows & Doors Problems We See in Crosby Homes
- Post-Harvey patchwork failures. Contractors under time pressure after the 2017 flood installed builder-grade, non-impact-rated units to move houses to permit sign-off. Those windows are now six to eight years old with blown seals and fog creeping between panes, and they still don’t meet hurricane-load standards for the San Jacinto floodplain.
- Deadbolt misalignment from flood-lift slab movement. Many Crosby door thresholds were shimmed and reset with scrap wood rather than properly rehung after the flood receded. The residual slab movement leaves frames slightly out of square, and the deadbolt won’t throw. Homeowners blame settling, but it’s residual flood-lift damage to the slab perimeter.
- Aluminum frame oxidation from corridor humidity. The original single-pane aluminum windows common on 1970s and 1980s wood-frame ranch houses in Crosby oxidize heavily in this air. Sashes won’t seat flush, and the pitting weakens corners until the frame eventually lets moisture behind the wall.
- Seal failure on cheap replacement units. Low-cost replacement windows installed after Harvey were never built for this humidity cycle. Dual-pane seals fail within a few years, argon gas leaks out, and the insulating value drops to nearly zero. Fogged glass is the symptom; the problem is the unit itself.
Pricing for Custom Windows & Doors in Crosby, TX
We price custom windows and doors in Crosby by the opening, not by the house. A standard double-hung replacement runs $850-$1,600 installed. Custom shapes run $1,100-$3,600. Oversized and structural units run $2,200-$6,800. Commercial storefront and curtain wall work is priced by the square foot at $90-$220 and $120-$280 respectively. That’s the honest range for this market. What moves you within it: frame material, glass package, impact rating, and whether we’re correcting a rough opening that Harvey left out of square. Estimating is free, written, and specific. Call (888) 635-0804 and we’ll put every number on paper before any work begins.
We Also Serve Cities Near Crosby
Our crews serve homeowners throughout the northeast Harris County corridor, including Channelview, Humble, Kingwood, and La Porte. If you’re outside Crosby proper but still within a short drive of our dispatch office, we’re happy to schedule an estimate. A live person always answers the phone at (888) 635-0804, so call us from wherever you are along FM 2100 or Highway 90.
Serving Crosby, TX - Our Local Coverage Area
We’re based in the Crosby area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in Crosby
Because the post-Harvey rebuild wave prioritized speed over specification. Builders and contractors racing to meet permit timelines and insurance deadlines installed large quantities of builder-grade, non-impact-rated windows and doors. Those units are now six to eight years old, their dual-pane seals are failing in Crosby’s relentless Gulf Coast humidity, and they lack the storm-rated glazing required for the wind loads funneled up Galveston Bay. The result is a concentrated replacement market across the San Jacinto River floodplain, and we replace these units weekly. Call (888) 635-0804 for an exact quote on what your home needs now.
Look for fog or haze between the panes, a milky film on the glass interior that won’t wipe off, or condensation that forms between panes on humid mornings. Argon is invisible, but when the seal fails the gas leaks out and outdoor humidity works its way in. In Crosby, that failure shows up fast because the ambient humidity is so high. If you’re seeing fog on a unit that’s under ten years old, it was likely a builder-grade replacement from the Harvey rebuild. We inspect and replace these units regularly. Call us to schedule an assessment. We’ll tell you honestly whether it’s a seal failure or something else.
Yes, in Crosby you do. The concern isn’t only storm surge from the bay; it’s the wind tunnel effect created by the San Jacinto and Trinity river corridors when a hurricane pushes inland. Even homes on high ground off Wahl Street or near the high school feel significant wind loads during a serious storm. Impact-rated glazing from manufacturers like PGT or CGI is built to resist that wind pressure and the debris it carries. It’s not a luxury upgrade in this part of Harris County; it’s a practical necessity. We’ll show you the price difference between coastal-spec and inland-spec in writing so you can decide with real numbers.
In Crosby it’s often something else. Many homes that flooded during Harvey had door thresholds shimmed and reset with whatever scrap wood was handy, rather than having the door frame properly ripped out and rehung. When the slab lifts during a flood, the perimeter shifts and the door jamb goes slightly out of square. The deadbolt doesn’t throw because the jamb is off, not because the house is settling. We see this constantly on ranch houses across the 77532 ZIP. The fix is to reset the jambs square and reflash the opening, not just to chisel the strike plate. Call (888) 635-0804 and we’ll look at it.
Coastal-spec windows for Crosby’s wind and humidity zone run roughly 25-40% more than the inland-spec version of the same size. For a standard double-hung, that means $950 inland-spec versus $1,200-$1,450 coastal-spec. The difference buys heavier glass, impact-rated laminated interlayers, corrosion-resistant hardware, and a frame extrusion built for marine exposure. The cheap spec costs more within a decade because you replace it at least once, sometimes twice, while the coastal-spec unit is still under warranty. We quote both on paper and register both warranty layers before we leave your driveway. Call (888) 635-0804 for a written comparison on your exact openings.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Crosby and the surrounding San Jacinto floodplain communities since 2008.