Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Custom Windows & Doors Across San Bruno
Custom window and door work in San Bruno is not the same job it is two miles inland. If your home sits under the SFO approach corridor or catches the San Bruno Gap winds off the Pacific, you need glazing specified for noise, salt air, and wind-driven moisture. Most San Bruno homes in Crestmoor, Rollingwood, and the flats east of El Camino Real were built between 1947 and 1961 with original steel or aluminum single-pane windows that were never designed for any of that. We measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. Call (888) 635-0804 and a live person answers, any hour.
Why TruePane Windows & Doors Is San Bruno’s Preferred Custom Windows & Doors Company
TruePane was founded in 2008 by second-generation glazier Dale Kessler on one rule: if the pane is not true, the job is not done. We do not sell windows by brochure. We walk the house, measure the rough openings, check what the wind and fog have been doing to the frames, and tell you what will actually hold up in San Bruno’s specific conditions.
Our crews know the 94066 housing stock because they work it every week. The post-war tracts off San Bruno Avenue, the 1950s ramblers climbing toward Crestmoor Canyon, the split-levels along Sneath Lane. Same for the homes that back up to the freeway or sit directly beneath the glide path. We show up uniformed, background-checked, and on time. We quote what the job costs, in writing, before work starts. And we stand behind it with the Keystone Standard: both manufacturer warranty layers registered in writing, durations stated, workmanship guaranteed for 90 days with no paperwork fights and no arguing.
When a San Bruno homeowner calls at 2 a.m. because a window let go in a winter storm, a live person answers. Not a voicemail tree, not a callback form. We get someone to your door because we plan to be in this town in thirty years.
Our Custom Windows & Doors Services in San Bruno
Every job below is measured, quoted, and installed by tradespeople who understand what San Bruno’s wind, fog, and flight paths do to a window. Our Custom Windows & Doors team handles the full scope - from one custom replacement sash to whole-house glazing retrofits.
Custom Shape Windows
San Bruno’s ranch and mid-century homes often have odd-sized openings: arched tops, trapezoid transoms, picture windows with clipped corners. Big-box stock will not fit them and a pocket insert will not seal them. We template the actual opening, order the frame to the eighth of an inch, and set it square. In a home facing the San Bruno Gap, a custom-shaped window done with the wrong flashing will leak within two winters. We spec marine-grade fasteners and sill flashing that holds.
Typical custom shape window replacements in San Bruno run $900 to $2,800 per unit, installed, depending on glass package and frame material. Laminated acoustic glass pushes toward the higher end.
Commercial Storefront Glazing
For storefronts and small commercial spaces along San Mateo Avenue and El Camino Real, we handle commercial storefront glazing from single lite replacement to full storefront system rebuilds. San Bruno storefronts take a beating: west-facing glass gets direct afternoon sun through the Gap, and the fog leaves a corrosive film on aluminum mullions. We recommend thermally broken frames and marine-grade finishes in this city. A storefront reglaze here typically runs $3,500 to $12,000 depending on frontage and code requirements.
Curtain Wall Systems
Larger commercial or mixed-use buildings in San Bruno - particularly anything within earshot of SFO - often need curtain wall systems specified for STC and U-factor performance, not looks alone. We work with building owners and architects to quote systems that meet the airport noise study on file, then install to manufacturer spec with all warranty paperwork registered. Curtain wall replacement in San Bruno is a made-to-order job: expect $80 to $180 per square foot of wall area, with engineering and crane access adding cost.
Architectural Grilles & SDLs
For homeowners who want divided lite character without the thermal penalty of true muntins, architectural grilles and simulated divided lites are standard practice. We install SDLs on fiberglass, wood, and aluminum-clad frames throughout San Bruno. Because of the wind, grilles here need exact reveal alignment: when we set a window in a Rollingwood home, we shim and level every sash so nothing rattles when the afternoon wind climbs above 20 mph. Grille packages add roughly $120 to $300 per window and are worth every dollar on the curb-facing elevation.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Oversized Glass Panels in San Bruno
Oversized glass panels are a different animal in a windy city. A 10-foot fixed pane in Pacifica behaves differently than one in San Bruno, because the Gap accelerates wind gusts and creates pressure differentials across the seal. We specify laminated glass for large panels in San Bruno, not standard annealed, and we set them with structural glazing tape and perimeter blocking that meets wind-load calculations for your specific exposure. A custom oversized fixed panel in this city runs $1,800 to $6,000 installed, with the higher end reserved for second-story or crane-assisted installations.
Trusted Brands We Service in San Bruno
We are an authorized installer for more than a dozen manufacturer lines, and in San Bruno we most often quote for residential work. For impact and coastal-adjacent applications, we carry CGI, ES Windows, and ECO Window Systems product lines and can have factory quotes on paper within days, not weeks. If you already have windows by a specific brand and need replacement sashes, hardware, or a full-frame retrofit, we can order direct from the factory and register both warranty layers in your name before we leave the driveway.
Common Custom Windows & Doors Problems We See in San Bruno Homes
San Bruno has three enemies of window performance: SFO aircraft noise, the San Bruno Gap wind, and the salt-laden fog that sits over the hills most mornings. Here is what that means in practice:
- Corroded aluminum frames at the jambs. The wind-driven salt fog east of the Gap causes pitting and white corrosion within a decade on untreated aluminum. Once the jambs corrode, sashes bind and seals fail. We replace these with thermally broken aluminum or fiberglass frames with marine-grade finishes.
- Fogged double-pane units in Crestmoor and Rollingwood. Original windows are mostly single-pane steel. But retrofit acrylic or cheap vinyl inserts from the 1980s and 1990s are failing now. Wind pressure flexes the seal, moisture gets in, and the glass fogs. We do full-frame replacement, not reglazing, on these.
- Wind-driven rain at the sill flashing. During winter storms, southwest-facing windows take rain nearly horizontally. If the sill flashing is not lapped correctly and sealed, water gets into the wall cavity. Hidden mold follows. We see this regularly on homes built in the 1950s. We strip the old flashing, inspect the rough opening, and install new sill pans before setting the window.
- Rattling windows under aircraft noise. Even quiet double-panes rattle if the frame is loose or the sash is out of alignment. But in San Bruno’s Part 150 noise-eligible zones, the bigger issue is the glazing spec. A window with STC 30 will not cut it when the noise study requires STC 38 or 40. We verify the spec before ordering glass.
Pricing for Custom Windows & Doors in San Bruno, CA
Here is what you should expect to pay for custom window and door work in San Bruno, CA. These are installed, turnkey ranges, not unit-only prices:
- Custom shape window replacement: $900 - $2,800 per window
- Full-frame window replacement with laminated acoustic glass (STC 38-40): $1,400 - $3,200 per window
- Oversized fixed glass panel: $1,800 - $6,000 installed
- Architectural grilles & SDL package: $120 - $300 per window added
- Commercial storefront reglaze: $3,500 - $12,000 depending on frontage
What moves the price is the glazing spec. Laminated acoustic glass costs more than standard double-pane. Marine-grade hardware costs more than standard mill finish. Full-frame replacement costs more than pocket inserts because the old frame comes out entirely. If you live under the SFO flight path and need FAA Part 150-compliant windows, the glass package alone typically runs 30-45% higher than the same window with standard Low-E. We quote both options on paper so you see the difference before you spend a dollar. Call (888) 635-0804 for a free estimate on your home.
We Also Serve Cities Near San Bruno
Our crews work throughout the northern Peninsula. We serve San Bruno daily, along with Millbrae, South San Francisco, Pacifica, and Daly City. Each of those cities has its own microclimate and spec requirements, which means we do not quote them the same way either. If you are nearby and need custom windows or doors, call the same number: (888) 635-0804.
Serving San Bruno, CA - Our Local Coverage Area
We’re based in the San Bruno area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Custom Windows & Doors in San Bruno
If your home falls inside a Part 150 noise-eligible zone, you will almost certainly need STC-rated laminated glazing to qualify for federal reimbursement on your window replacement. Most San Bruno homes in those zones require STC 35-40 minimum. We confirm your address against the noise study on file with the airport authority and order glass that matches the spec exactly. Get the glazing wrong and the reimbursement stalls. We handle that paperwork with every Part 150 job. Call (888) 635-0804 and we’ll check your eligibility.
San Bruno sits directly in the path of marine fog and wind funneling through the San Bruno Gap, while Millbrae is sheltered on the lee side of the hill. That means aluminum frames in San Bruno get a steady salt spray that Millbrae homes never see. The result is corrosion at the jamb and sill within ten to fifteen years. We recommend fiberglass, thermally broken aluminum with marine finish, or vinyl with UV-stabilized frames for San Bruno homes.
You can sometimes replace just the glass in a well-built existing frame. But most of the 1940s-to-1960s homes in Crestmoor and Rollingwood have original steel or aluminum frames that are already corroded, out of square, or too shallow to accept a laminated acoustic unit. In those homes, we recommend full-frame replacement. You get a better seal, better STC performance, and a frame that will not bind or leak. We quote both options and tell you which will actually solve the problem.
Wood windows in San Bruno need more protection than the same window in a dry inland city. Untreated or poorly finished wood absorbs salt moisture, swells, and starts to rot at the sash corners. We recommend aluminum-clad wood windows for San Bruno homes, with the exterior cladding and hardware specified for marine exposure. We also pre-drill and seal every fastener with high-grade sealant, and we set sill pans that direct water away from the rough opening. A wood window installed to inland standards will rot here within a decade.
Coastal-spec windows for San Bruno typically run 20-40% more than the same size window with an inland spec. The extra cost is in the laminated acoustic glass, the marine-grade frame and hardware, the upgraded flashing, and the additional labor to install pan and sill details that wind-driven rain will not defeat. The cheaper inland spec often gets quoted against our coastal spec, and it looks like we are high. But the cheap window starts corroding and binding within a decade. We quote both options side by side, with the spec sheets, so you decide what you want to buy. Call (888) 635-0804 and we’ll bring the paperwork to your kitchen table.
Call TruePane Windows & Doors in San Bruno
We are TruePane Windows & Doors, led by Dale Kessler, a second-generation glazier who built this company on the rule that a square pane and a true opening are the definition of a finished job. We have been serving local communities since 2008 through a heritage of craft, and we back every San Bruno job with the Done Right Promise. We register both manufacturer warranty layers in writing before the truck leaves. We quote upfront, we do not change the price after the fact, and we answer the phone live, 24 hours a day, 7 days a week. Call (888) 635-0804 and we’ll schedule your free estimate. A square deal, in writing.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving San Bruno and the northern Peninsula with custom window and door installations.