Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Door Installation Across Garland
Door installation in Garland typically runs $900-$3,200 for an entry door replacement, with storm doors at $350-$850 and full-frame rebuilds on older ranch homes landing between $1,800-$4,500 depending on what’s behind the existing jamb. Most Garland jobs are completed in a single visit, and we schedule free estimates across 75043, 75044, 75045, and 75046 every week. Call (888) 635-0804 and a live person answers, not a voicemail tree.
We’ve worked the east-side streets off Broadway and the curved cul-de-sacs in Sachse-adjacent 75044 long enough to know what’s behind most doors before we’ve unlatched them. A 1968 ranch on Naaman Forest Drive is going to have flash-flood silt at the threshold. A 2016 tornado rebuild off Castle Drive will have a wind-load sticker balled up in the garage. We plan for that.
Why TruePane Windows & Doors Is Garland’s Preferred Door Installation Company
We’re a Dallas-Fort Worth company that schedules crews into Garland daily, and our installers know the housing stock here without a map. Original steel door frames from the late 1960s, aluminum sliders on den doors, post-tornado slab replacements done by out-of-town insurance crews. We have pulled apart all of them in Garland.
Garland homeowners generally do not want a franchise playbook. They want a crew that shows up when it says it will, measures every rough opening twice, and registers both warranty layers before the truck leaves the driveway. That is The Keystone Standard, and it is written on every quote we leave on a Garland kitchen counter.
Our background-checked, uniformed technicians work the way they would in their own mother’s house. Most Door Installation jobs in Garland are completed the same day, and the Done Right Promise means if something isn’t right, we return and make it right without paperwork fights. No arguing, no fine-print stalling.
Our Door Installation Services in Garland
Entry & Swing Doors
The front door on a 1960s Garland ranch usually needs more than a slab. Our crews commonly find rusted-through jambs, sagged headers, and weatherstripping channels packed with decades of North Texas silt. We replace the full frame, set the threshold correctly, and install a door rated for Garland’s wind-load requirements, not whatever the big-box store had in stock.

Storm Doors
A storm door in Garland is the first line against hail stones the size of a nickel. Original 1970s ranch homes on the east side of 75043 often have no storm door at all, just a bare steel slab facing the weather. We install full-view and ventilating storm doors that take the impact while the primary door behind stays sealed. This matters twice as much on streets within the 2015 tornado path where wind-driven debris is not hypothetical.

Double & French Doors
Older Garland ranches with original single-pane French doors are living on borrowed time. Hail cracks that glass. Thermal swing breaks seals. The January freeze made it worse. We swap in double-pane, low-E units with a proper astragal so the doors actually meet and seal. On homes rebuilt after the tornado, we upgrade the jamb flashing that the insurance-grade crews left out.

Pivot Doors
Pivot doors on newer Garland construction need a tradesperson who understands the torque a 250-pound panel puts on a floor hinge and a top pivot. We set pivot doors with a 4-foot level in two directions because a pivot door that drags in July was never set true. If the pane is not true, the job is not done.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Garland
We are an authorized installer for more than a dozen manufacturer lines, and for Garland homes we commonly quote side by side on paper so the homeowner sees exactly what they are buying. For storm-rated replacements on the tornado-rebuilt east side, we recommend and install CGI, CWS, and ES Windows assemblies that meet Garland’s wind-load code. You see the spec sheet before you sign, and the warranty registrations before we leave.
Common Door Installation Problems We See in Garland Homes
- Rusted or rotted sills on original steel door frames from the 1960s and 70s. The bottom of the jamb goes first, usually where the sprinkler system soaked it for thirty years. Water gets past the weatherstripping, the threshold starts to feel spongy, and wind-driven rain leaks under the door during storms.
- Post-tornado door slabs with no flashing tape at the jambs. Homes rebuilt in 2016 along the Firewheel corridor toward Rowlett often got minimum-code slabs but no proper rough-opening flashing. The first thunderstorm leaks, and by the time the homeowner notices, there is rot in the framing. A real Door Installation in Garland starts with the rough opening, not the slab.
- French doors that bind in July and leave a gap in February. North Texas thermal swing moves a double door unit more than people think. A unit that was hung tight in January will rub the header by August. Properly set hinge screws and an aligned astragal fix most of it.
- Storm doors with crushed closers and bent frames from hail impacts. Garland sits in the highest hail frequency band in the DFW metro. Cheap storm doors fail after the first big storm season. We install units with the closer on the correct side for the prevailing wind and a bottom expander sealed against the threshold.
Pricing for Door Installation in Garland, TX
On a typical Garland month, our quotes fall into these ranges: entry and swing door replacement at $900-$3,200, storm doors at $350-$850, double or French door units at $1,500-$4,500, and full-frame rebuilds on original steel door openings at $1,800-$4,500. A post-tornado rebuild that needs documented wind-load compliance usually settles in the upper end of the range because the frame, flashing, and inspection paperwork are all part of the work.
We give upfront line-item pricing, not a round number. You see the material cost, the frame work, the flashing, the permit fee, and the labor separated out. If the permit office needs a wind-load calculation or a DP rating letter, that is in the quote before you sign. Call (888) 635-0804 for a free estimate in Garland.
We Also Serve Cities Near Garland
Our Garland crews regularly run jobs into Rowlett, Richardson, Mesquite, and Plano during the same week. We know those neighborhoods too, and we quote them the same way: line-item, documented, and backed by the Done Right Promise whether the house is on a Garland cul-de-sac or a Mesquite ranch street.
Serving Garland, TX - Our Local Coverage Area
We’re based in the Garland area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Garland
A replacement door for a Garland home in the 75040, 75043, or 75044 ZIP codes should meet the wind-load requirements of the city’s post-2015 residential code adoption, which generally falls in the 90-110 mph design wind speed range depending on the structure’s exposure. We specify the exact DP rating in writing on your quote. A cheap contractor may install a door with no documented rating at all. That is the one that fails an insurance claim review after the next storm. Call (888) 635-0804 and we will check your specific address.
Yes. Garland requires a permit for door replacement when opening dimensions change, framing is altered, or the door assembly is part of a structural repair. We pull the permit, schedule the inspection, and leave the signed paperwork with the homeowner. That documentation is exactly what an insurance adjuster will ask for after a future storm claim.
The steel jambs on 1960s Garland ranch homes were set directly on concrete slabs with no sill pan, and years of lawn irrigation, monsoon rain, and a slow plumbing drip corrode the jamb from the bottom up. On a 75044 street off Naaman School Road, we pulled a 1972 steel entry door whose jamb had rusted through entirely, letting daylight past the weatherstripping. We replaced it with a full-frame, fusion-welded fiberglass entry system rated for Garland’s wind-load requirements, installed flashing tape at the sill and jambs, and swapped in a low-E glass insert. Then we documented the DP rating and permit for the homeowner’s insurance file. That is the difference between a door swap and a door done right.
A well-built storm door can stop hail that would otherwise crack a glass insert or dent the outer panel of your entry door. But only if the storm door is properly flashed at the threshold and the screen channel seals correctly for your prevailing wind. The cheap storm doors sold at retail are not designed for Garland’s hail storms. A properly fitted one extends the life of the entry door behind it and keeps wind-driven rain off the primary weatherstripping. Call
Walk the door opening and look at the sides and bottom. If the jamb sits flat against brick with no flashing tape or caulk bead visible at the sill, that door probably leaks. If the corner seals on a double French unit are loose enough to slide a fingernail under, the slab was never properly compressed. Before matching a neighbor’s door, let us check what code requires for your side of the street. The two houses may be on the same block but have different inspection records.
Written by Dale Kessler, Owner at TruePane Windows & Doors. We have installed and serviced doors across Garland’s east-side neighborhoods for years, and we will be here in thirty years to stand behind the work.
Why Garland Chooses TruePane Windows & Doors
We set the standard for door installation in Garland.
Factory-Direct Pricing
Authorized partner pricing with no distributor markup - premium aluminum systems at wholesale-anchored rates.
Engineered to Order
Any shape, size, or specification, fabricated to your exact opening with one-on-one engineering support.
Certified Installation
Set level, plumb, and square to AAMA standards in Garland - warranty-safe, every time.
How It Works in Garland
Getting your door installation handled is simple and fast.
Call or Request a Free Estimate
Tell us about your door installation needs and we provide an upfront, transparent quote - no obligation, no hidden fees.
Licensed Technician Dispatched
A background-checked, certified technician arrives in Garland - typically within 30-60 minutes, with parts stocked on the truck.
Problem Solved, Guaranteed
We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.
What Garland Customers Say
Trusted by homeowners across Garland and surrounding areas.
"Whole-house window replacement at 71 years old is not something you want to do twice. Dale walked the house himself for the quote. Crew was the same three men all four days, and the foreman knew every window by room."
"Eleven windows replaced in two days. The crew chief, Marcus, showed me the level on every single frame before they caulked it. My wife noticed the street noise was gone before I did."
"A casement crank had stripped and the sash was swollen shut. The technician, Ray, fixed the crank on the spot and only then talked about replacement for the three windows that were genuinely done. That is why the whole street uses them now."
Our Work in Garland
A look at recent windows & doors projects across Garland and surrounding areas.
Current Offers
Bring these savings to your next appointment.
Free On-Site Estimate & Written Quote
No obligation. We measure, price the job in writing, and the quote is yours to keep.
Senior & Veteran 5% - Always
Ready for Door Installation in Garland?
Call now for a free estimate - or request one below. Licensed, insured, and here with fast after-hours help in Garland.
(888) 635-0804Request a Free Estimate in Garland
Tell us about your door installation needs - we'll respond within the hour.



Before
After
Before
After
Before
After