Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Arlington
If your Arlington patio slider binds in the heat, fogs between the glass, or rattles every time a storm rolls through, the door has already told you what it needs. TruePane Windows & Doors handles Door Installation in Arlington and repairs for sliding and patio doors across Arlington, TX, usually in a single visit, and we quote the work on paper before the truck ever leaves the driveway. Call (888) 635-0804 for a free estimate. A live person answers, not a voicemail tree.
We know the housing stock between Division Street, East Abram Street, and the subdivisions south of I-20 because we work them every week. Arlington’s original aluminum sliders fail in predictable ways, and we know exactly what a code-compliant replacement should include before the first permit is pulled.
Before you buy, one thing matters more than brand or price: does the door carry a design pressure rating that will pass a Tarrant County wind-load inspection. In most Arlington ZIP codes, the answer has to be yes. We’ll explain why below.
For the full scope of what we install, visit our Sliding & Patio Doors team page. For a closer look at how we serve this side of the Metroplex, see Sliding & Patio Doors in Arlington.
Why TruePane Windows & Doors Is Arlington’s Preferred Sliding & Patio Doors Company
TruePane was founded by Dale Kessler, a second-generation glazier, back in 2008. The company’s been building a craft reputation since 2008 through Dale’s family trade, not through a franchise playbook. The two warranty layers get registered in writing before our crew leaves your driveway. That’s The Keystone Standard, and we put it on every quote in plain English.
Arlington homeowners tell us the same thing again and again: they’ve been burned by Window Installation in Arlington crews who measured once, rushed the flashing, and vanished when the seal failed. We don’t rush. Our technicians measure every opening twice, quote manufacturer lines side by side, and are background-checked and uniformed. They work in your home the way they’d work in their own mother’s.
We’re not the cheapest bid in Arlington. We’re the last call you’ll need to make. If the work isn’t done right, the Done Right Promise means we come back and make it right, no paperwork fights and no arguing.
Dispatch for Arlington jobs is coordinated from our Dallas-Fort Worth office, and crews serve this city locally, which means you’re not waiting on someone driving in from another county to quote a door on Division Street.
Our Sliding & Patio Doors Services in Arlington
Patio Sliding Doors
The classic two-panel patio slider is still the workhorse of Arlington ranch homes from the 1960s and 1970s. When we replace one, we’re not just swapping glass. We’re rebuilding a rough opening that has spent fifty years settling, heat-cycling, and taking hail hits. Most east Arlington homes need a full-frame replacement, not an insert, because the original aluminum frame has corroded corners and the surrounding flashing is shot.
Panoramic Sliding Systems
For Arlington homeowners opening up a back wall to a patio or pool deck, panoramic sliders use two, three, or four panels that stack or pocket to one side. These doors carry heavy glass loads, so the header and sill have to be engineered correctly. We specify the track system and frame reinforcements to meet TDI wind-load standards for Arlington’s exposure, then pull the permit and follow the inspection through to signed approval.
Heavy-Duty Sliding Doors
If your Arlington home faces west across an open field or backs up to Lake Arlington, your patio door takes wind loads most of the city never sees. Heavy-duty sliders from Andersen, PGT, and CGI are built with thicker interlock rails and reinforced frames. We install these specifically for Arlington homes where the original slider tests below DP 25, which we see consistently in 76010, 76011, and 76014.
This matters practically: a DP 50-rated door is what most TDI wind-load inspections require for storm damage coverage. A door rated DP 25 is not compliant, and a cheap quote that leaves that detail off the paperwork will cost you on the insurance claim later.
Pocket & Barn Doors
Pocket sliders disappear into the wall, and in Arlington’s older brick-veneer homes, that means opening a load-bearing partition carefully and rerouting electrical if it’s in the cavity. Barn doors ride on exterior-grade track and need proper flashing against Tarrant County’s spring storms. We handle both, and we’ll tell you honestly if a wall is load-bearing or if the barn-door route will leave a gap you don’t want in a hail corridor.
Screen Door Installation
Arlington’s mosquito season runs long, and a patio slider without a working screen means choosing between ventilation and getting bitten. We install heavy-duty sliding screen doors that hold their track alignment through storm season, which is not something every big-box screen handles. Hail dents a cheap aluminum screen frame on the first good storm in April.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Arlington
We’re an authorized installer for Custom Windows & Doors - Arlington from more than a dozen manufacturer lines, and for Arlington’s wind-load requirements we lean on PGT, CGI, and ES Windows for their rated, code-compliant sliding door systems. Every quote lists the manufacturer, the model, the DP rating, and both warranty layers side by side on paper. You see exactly what you’re buying, and we register the warranties in writing before the truck leaves.
Some shops sell you a door and let you figure out the warranty card yourself. We don’t. The Keystone Standard means both layers are registered, with durations stated, and you get a copy before we sweep up.
Common Sliding & Patio Doors Problems We See in Arlington Homes
- Corner-joint separation on original 1970s aluminum sliders. Decades of 100-degree summers and hard-water mineral deposits corrode the frame welds. On a pre-bid walkthrough along Division Street or East Abram, our tech often closes the sale just by pointing a flashlight at the corners.
- Fogged insulated glass from a frame racked by hail. The glass itself may not crack, but the impact racks the frame enough to break the seal. Argon leaks out, the U-factor dies, and the door starts sweating on humid mornings in May.
- Rollers seized from silt and mineral buildup. Tarrant County’s moderately hard water leaves deposits in the track. Add spring storm silt, and the panel jumps the track or won’t slide without a fight. We see this constantly in 76010 and 76014.
- Doors that bind in July and leak in February. The temperature swing between an Arlington summer afternoon and a cold snap like the February 2021 event stresses expansion joints and threshold seals. A door that’s fine in October can be frozen shut by morning. That’s a frame install problem, not a weather problem, and it’s fixable with a proper full-frame replacement.
Pricing for Sliding & Patio Doors in Arlington, TX
A standard two-panel patio slider replacement in Arlington generally runs $1,800 to $4,200 installed, depending on the manufacturer, the DP rating, and whether it’s a full-frame replacement or an insert retrofit. Most east Arlington ranch homes require full-frame work, which sits at the upper end of that range.
A heavy-duty, wind-load-compliant slider from PGT, CGI, or Andersen typically runs $3,500 to $7,500 installed, including the required flashing, permit coordination, and signed inspection. A panoramic multi-panel system is a different animal entirely, usually $8,000 to $20,000+, depending on panel count and engineering.
Screen door installation for an existing patio slider runs $250 to $650, depending on frame material and track condition.
Every quote we write in Arlington is a fixed price. No change orders unless you change the scope. Call (888) 635-0804 and we’ll send a technician to measure and quote on the spot. The estimate is free.
We Also Serve Cities Near Arlington
Our crews work throughout the Mid-Cities, including Grand Prairie, Kennedale, Euless, and Bedford. If you’re just outside the Arlington line, call anyway. Arlington is our home base for this side of the Metroplex, but the same TDI wind-load requirements and the same craft standard apply just across the city limit.
Serving Arlington, TX - Our Local Coverage Area
We’re based in the Arlington area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Arlington
Most Arlington homes need a design pressure rating of at least DP 50 for a sliding patio door to pass Tarrant County wind-load inspection and keep your storm damage coverage intact. Original 1960s through 1980s aluminum sliders in 76010, 76011, and 76014 often test below DP 25, which means they’re non-compliant and your insurer can cite that during a hail claim. Call (888) 635-0804 for a free on-site rating assessment.
Shine a flashlight at the corners of the frame on a dark evening. If you see light through the corner joints, or if the door rattles against the interlock when the wind picks up, the frame has lost its structural seal. Also check for moisture between the glass panes, which means the insulated unit’s seal has failed and the door’s insulating gas is gone. Our technicians identify this on a free estimate call.
Yes, in many Arlington cases. If you replace a non-compliant slider with a DP 50+ rated door and your insurer has a windstorm mitigation discount, the documented upgrade can reduce your premium. The key is the paperwork: the invoice, the permit, the passed inspection, and the DP rating on the manufacturer’s spec sheet. We provide all of that in writing before leaving the job, so you can hand it directly to your agent.
Because it wasn’t installed with the wind-load documentation and flashing details Arlington’s inspectors require for a compliant opening. Big-box sales often skip the permit entirely, and the installer sets the door with minimal flashing and no DP rating on the invoice. The inspection fails on paperwork or on the rough opening, and now you’re chasing a subcontractor. We pull the permit, coordinate the inspection, and hand you the signed card with everything in one package.
Yes, most sliding patio door replacements in Arlington require a building permit because the opening must be inspected for wind-load compliance and flashing. The permit process typically takes a few days to a couple of weeks, depending on the city’s current queuing, and the inspection is scheduled after installation. We handle the permit application and coordinate the inspection so you’re not left reading a city website on your own. Call (888) 635-0804 and we’ll walk you through the timeline for your specific ZIP code.
Get Your Arlington Sliding Door Done Right the First Time
If your patio slider has been telling you it’s done, listen. The older the house, the more likely the original door is out of wind-load compliance and costing you money on every hail season. TruePane will measure, quote, permit, install, and stand behind the work with the Done Right Promise and The Keystone Standard, in writing.
Call (888) 635-0804 to schedule your free estimate in Arlington. A live person answers. We’ll be there when we say, and the door will be true when we leave.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Arlington and the surrounding Metroplex with a craft tradition now in its second generation.