Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Sliding & Patio Doors Across Burbank
Sliding and patio Door Installation - Burbank typically runs $1,800 to $6,500 per door installed, with most projects completed in one day once the door is on site. That price range accounts for the specific conditions we deal with here: tight 1930s and 1950s lots, airport-adjacent noise concerns south of Magnolia Boulevard, and a lot of original aluminum sliders that are decades past their service life. Our crews know Burbank’s streets, its permit office, and its work-hour rules. If you’re weighing a repair against a replacement, call (888) 635-0804 and we’ll give you a straight answer with numbers on paper.
Key Takeaways
- Most Burbank sliding door replacements run $1,800-$6,500 depending on glass package, frame material, and site access.
- Homes under the Hollywood Burbank Airport approach corridor often need STC 35-40+ laminated glass, which adds $400-$900 per door.
- Burbank’s construction noise ordinance limits work to specific hours; we schedule around it from day one.
- Historic overlay zones in Burbank may require design review before a door swap; we handle that paperwork.
- Our Sliding & Patio Doors team has been setting doors on tight lots since 2008 of combined craft tradition.
Why TruePane Windows & Doors Is Burbank’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 with a rule that still governs every install: if the pane is not true, the job is not done. Burbank homeowners have called us for everything from a sticky original slider on a Bel Aire Drive bungalow to a full panoramic door system on a Magnolia Park remodel. We work on the houses this city is actually made of, not just the new builds.
What Burbank customers seem to appreciate most is that we quote like a tradesperson, not a salesperson. You get a written line-item estimate with manufacturer names, glass ratings, and labor broken out. No vague allowances, no surprise change orders at the curb. Our background-checked, uniformed technicians measure every opening twice before anything gets ordered.
We also answer the phone. A live person picks up 24 hours a day, 7 days a week, no voicemail tree. When you call about a fogged slider or a door that’s binding, you’re talking to someone who can actually help, not a call center reading a script.
Our Sliding & Patio Doors Services in Burbank
Patio Sliding Doors
The classic two-panel slider is still the workhorse in Burbank’s 1950s and 1960s tracts, but the original frames are usually done. We replace them with Custom Windows & Doors - Burbank dual-pane low-E units that handle Burbank’s summer heat far better than anything aluminum and single-glazed from 1962 ever could. A standard 6-foot patio slider replacement here runs $1,800-$3,400 installed, depending on the frame material and glass package. Most of these go in same day.
Panoramic Sliding Systems
Homeowners in the Ranch District and up toward the Verdugo foothills are increasingly opting for multi-panel panoramic doors that open a whole wall to the backyard. These are bigger projects, $6,500 and up, and they require real structural care on Burbank’s older homes. We pull the header specs, verify load paths, and handle permits before the first panel arrives. The result is a door that doesn’t sag, doesn’t chatter in Santa Ana winds, and doesn’t leak at the jamb seams.
Heavy-Duty Sliding Doors
If you’re putting a heavy slider on a west-facing wall with no windbreak, the door has to be built for what the Verdugo Pass sends through each fall. We specify reinforced frames, thicker glass, and better rollers on doors that will face sustained wind load. Burbank homeowners who’ve watched cheaper sliders flex and whistle during Santa Ana events understand why this matters. Heavy-duty sliders typically run $2,800-$5,500 here.
Pocket & Barn Doors
Pocket doors make sense on Burbank’s smaller lots, where swinging doors eat floor space that’s already tight. We can walk you through both framed pocket sliders and barn-style doors, and we’re careful about the wall structure we’re cutting into, especially on 1930s lath-and-plaster construction. If the wall is load-bearing, we say so before we cut, not after. Pocket door installation in Burbank generally falls between $1,500 and $3,000, more if the wall requires header work.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Burbank
We’re an authorized installer for more than a dozen manufacturer lines, and for Burbank jobs we lean on brands that handle both heat and acoustic load well: PGT, and ES Windows are common here. PGT’s laminated packages work well for airport-adjacent homes, Milgard’s vinyl lines hold up to heat without warping, and ES Windows gives us the custom sizing that Burbank’s older, non-standard openings often require. We stock common roller assemblies, locks, and weatherstripping for these lines locally, so a service call doesn’t turn into a two-week parts wait.
Common Sliding & Patio Doors Problems We See in Burbank Homes
- Fogged glass in airport-adjacent pockets: Pressure cycling from landing approaches accelerates seal failure on aging insulated glass units. We see clusters of failed seals in the blocks south of Magnolia Boulevard each fall and winter.
- Binding and sagging 1950s aluminum frames: The original sliders in post-WWII tracts have sagged at the header. Homeowners force the sash, crack the jamb, and then the door never closes right again.
- Jamb seam leaks on west-facing walls: Santa Ana wind loads through the Verdugo Pass push patio door panels hard enough to chatter and leak. Without proper weatherstripping and a square jamb, water follows the wind right inside.
- Hardware fatigue from daily use in tight homes: Burbank’s compact houses mean patio doors get used every day, not just for parties. Cheap rollers and locks wear out fast. We replace with commercial-grade hardware that doesn’t give up after two years.
Pricing for Sliding & Patio Doors in Burbank, CA
A simple 6-foot vinyl patio slider Window Installation - Burbank replacement runs about $1,800-$2,800. A mid-range aluminum-clad door with low-E glass lands between $2,500 and $4,000. If you add laminated glass for airport noise, expect $400-$900 more per door. Panoramic multi-panel systems start around $6,500 and climb with panel count and structural work. Pocket doors run $1,500-$3,000. These are installed prices, not bare-door numbers, and they include haul-away of your old unit. Call (888) 635-0804 for a written quote. Estimates are free, and the number we give you is the number on the final bill.
We Also Serve Cities Near Burbank
TruePane works throughout the San Fernando Valley and surrounding foothills. We regularly serve Glendale, North Hollywood, Universal City, and Tujunga, and our scheduling is coordinated from our Los Angeles office with crews dispatched locally to Burbank. If you’re just outside city limits, call and ask; we likely cover your street. Learn more about our Sliding & Patio Doors in Burbank coverage or give us a call directly.
Serving Burbank, CA - Our Local Coverage Area
We’re based in the Burbank area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Burbank
Yes, in most cases Burbank requires permit review when the visible exterior footprint or opening size changes, and homes in designated historic overlay districts may trigger additional design review before the door gets approved. We pull the permit and handle the review as part of the job. Call (888) 635-0804 and we’ll check your specific address against current city requirements.
Burbank’s municipal code limits construction noise to 7 a.m. to 7 p.m. on weekdays, with restricted Saturday hours and a general prohibition on Sunday work. A standard slider replacement fits comfortably inside those hours and usually finishes by early afternoon. We schedule our crews so the loud work happens well before the cutoff; call (888) 635-0804 to lock in a date.
Laminated glass with an STC rating of 35 or higher makes the biggest audible difference, and it’s what we recommend for homes south of Magnolia Boulevard under the approach corridor. It adds roughly $400-$900 per door. We’ll spec the exact glass package and give you the STC number in writing before you sign anything.
Legally, you generally can proceed without neighbor consent if the door is entirely on your property, but on Burbank’s tight lots we recommend giving the adjacent homeowner a heads-up, especially if our crew needs to stage materials across a shared driveway. Courtesy prevents the kind of dispute that delays a final inspection. We’ll help you time it with your neighbor’s schedule when we set the install date.
That fog is between the panes, not on the room-side surface, and it means the insulated glass unit’s seal has failed. Burbank’s thermal swings and airport pressure changes accelerate that failure. There’s no lasting repair for a failed seal; the glass unit gets replaced. Call (888) 635-0804 for a free estimate on new glass; most replacements fit the existing frame and take under two hours.
Written by Dale Kessler, Owner at TruePane Windows & Doors. Our Sliding & Patio Doors team serves Burbank and surrounding cities with the same standard we’ve kept since 2008: if the pane is not true, the job is not done.