Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Sliding glass doors
Impact garage doorsPGTCGI
Before
After
Before
After
Before
AfterFast, Reliable Door Installation Across Roanoke
Door installation in Roanoke usually costs between $900 and $4,200 depending on the door type, the condition of the rough opening, and whether the existing frame needs squaring before the new unit goes in. Most exterior door replacements here take one day once materials are on site. The catch in Roanoke is that many homes, especially the 2000s-era tract builds in 76262, have rough openings that are no longer square because the Blackland Prairie clay under the slab has been moving for fifteen years. That changes the job. Call (888) 635-0804 and we’ll tell you exactly what applies to your house before anyone shows up with a tape measure.
We know Roanoke because we work Roanoke. Not as a territory on a franchise map, but as the crews who drive Hwy 114 and 377, who know which subdivisions off Nance Road and Litsey Road were built in which boom year, and who have pulled enough trim in Alliance Corridor subdivisions to know what the builder left behind inside the wall.
Why TruePane Windows & Doors Is Roanoke’s Preferred Door Installation Company
Dale Kessler started TruePane out of a simple frustration: too many door and window installs in North Texas were going in out of square and out of level, and too many warranties were void before the homeowner even knew there was a problem. That founding rule, if the pane is not true, the job is not done, governs every door we set in Roanoke. We are not the lowest bid. We’re the company that writes both manufacturer warranty layers down, with their durations, before the truck leaves your driveway. That’s The Keystone Standard, and it applies to every entry door, French door, and storm door we install.
Roanoke homeowners call us because the builder-grade door that came with a 2007 house is now binding in July and leaking cold air in February. They also call us because they live in the older town center, in a 1950s wood-frame house with an original jamb that’s been painted shut more than once. Both callers get the same thing: a background-checked, uniformed technician who measures twice, quotes manufacturer lines side by side on paper, and registers the paperwork before leaving. No surprise line items. No second appointment left hanging. And a live person answers the phone 24 hours a day, every day, not a callback form.
We’ve been at this since 2008 as a craft tradition. TruePane itself was founded in 2008, but the trade in our family predates the Alliance Corridor as you know it. We hire local apprentices and train them into journeymen. We sponsor county fairs and church roof funds around the metro. We plan to be in town in thirty years, which matters when your door carries a warranty that should outlast the mortgage.
Our Door Installation Services in Roanoke
Entry & Swing Doors
A front door in Roanoke takes more abuse than most people realize. Hundred-degree summers, UV that bleaches fiberglass shells, and clay soil that works the frame loose season after season. We set entry doors in squared, re-flashed rough openings, which is the difference between a door that swings true in year one and year ten. For homes in the 76262 tract subdivisions, we typically recommend a fiberglass entry with a high-density foam core and a proper aluminum threshold with full weatherstripping. For the older Roanoke town center, a wood door can be the right call when the homeowner wants the original character, but the jamb and threshold likely need to be rebuilt to current code.
Double & French Doors
Double French doors are the most common failure point we see in Roanoke’s two-story brick homes from the 2000s. The center seam loses its alignment as the slab heaves, then the door binds the sweep and kills the weatherstripping. We reset the rough opening, not just the door slab. That’s the part that gets skipped on a lot of bids, and it’s why we include a frame-level assessment on every double door quote in Roanoke. If your French door fogs between the panes on cool fall mornings, the seal is gone and the door is failing from the frame out.
Bifold & Folding Doors
Bifold and folding doors work well in Roanoke when they’re specified for the soil. The wider the opening, the more the header and the slab movement matter. We set multi-panel folding doors with engineered headers that keep the track running true when the ground shifts. For patio and interior openings in 76262 and 76299, we walk you through the options: aluminum-clad for durability, wood for appearance, low-E glass always. The quote shows manufacturer lines side by side so you see exactly what you’re buying.
Pivot Doors
Pivot doors are becoming a real option for mid-century remodels in Roanoke’s original neighborhoods. A pivot door carries its weight on a top and bottom hinge assembly instead of side hinges, which changes how the frame reacts to slab movement. We’ve set pivot and custom doors in Roanoke where the homeowner wanted a wider front opening without a traditional swing arc eating the entryway. It’s a more involved install, and it’s one where the rough opening has to be dead square before anything else happens.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roanoke
TruePane is an authorized installer for more than a dozen manufacturer lines, and for Roanoke, that includes Ply Gem, PGT, and CWS. We stock replacement weatherstripping, thresholds, and common glass packs locally, so a warranty follow-up or a seal replacement doesn’t mean waiting on a freight truck from out of state. When we quote a door, we put the manufacturer lines side by side on paper. You see the performance specs, the warranty durations, and the price difference. No mystery. If you want impact-rated glass for the hail and storm seasons we get out here, PGT and CGI are in our line card. The quote will say so.
Common Door Installation Problems We See in Roanoke Homes
- Clay-soil heave racks frames out of square. In the 2000s brick tract homes all through 76262, the slab swells with spring rain and shrinks through summer drought. A door frame that was square in 2007 can be out by 3/8 inch by now, which binds the sweep and wrecks the weatherstripping. Fixing the door means fixing the rough opening first.
- Builder-grade flashing fails silently. Many Alliance Corridor subdivisions were built to minimum spec, with thin flashing tape and no moisture barrier behind the door jamb. By the time you see rot or staining at the bottom corners near Nance Road or Litsey Road, the sheathing inside the wall has already been wet for a while. We open and inspect before we quote a replacement.
- Original mid-century jambs no longer meet code. The older Roanoke town center has wood doors from the 1950s on original jamb and threshold assemblies. They’re out of compliance for egress and weather sealing. Patching and repainting doesn’t fix that. The permit on a replacement will require current rough-opening dimensions and hardware.
- Seal failure in double-pane glass shows up in fall. Roanoke’s dry autumn mornings are exactly when fog between the panes becomes visible. That fog means the insulated glass seal is dead and the door is no longer doing its thermal job. We replace the glass pack or the whole unit depending on the frame condition and the age of the door.
Pricing for Door Installation in Roanoke, TX
Here’s what Roanoke homeowners can expect to pay, on paper, before we bid the job. A standard entry door replacement on an existing, square rough opening runs $900 to $2,300. A double French door replacement, including squaring the rough opening and new flashing, runs $2,200 to $4,200. Bifold and folding door installs start around $1,800 and go up based on panel count and glass. Pivot and custom doors start around $3,500. If the permit inspection opens the wall and finds rotted sheathing or a header that’s no longer carrying load, that’s an allowance item written into the contract before we start, and any change is priced and approved in writing before we touch it. Call (888) 635-0804 for a free estimate. We’ll come out, look at the opening, and give you a line-item price you can hold us to.
We Also Serve Cities Near Roanoke
Our Door Installation crews cover Roanoke and the surrounding metro daily. If you’re in Southlake, Keller, Flower Mound, or Haslet, we work those neighborhoods too. The same background-checked crews, the same written warranty registration, the same Done Right Promise. Door Installation in Roanoke is our home base for this corridor, but we cross the city line regularly without blinking.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Door Installation in Roanoke
Because the Blackland Prairie clay under your slab is moving. Roanoke’s clay shrinks and swells more dramatically than Keller or Southlake soils, and every seasonal shift works your door frame a little further out of square. The door binds when the frame has moved enough that the slab and the jamb are no longer parallel. The fix is not planing the door down. The fix is squaring the rough opening and resetting the door in it. Call (888) 635-0804 and we’ll confirm it with a level before we quote anything.
Yes, for any exterior door replacement that changes the opening or the framing, Roanoke requires a permit, and TruePane pulls it for you and schedules the inspection. What a lot of homeowners don’t expect is what the inspection finds once trim is off on a 2000s-era tract home: undersized header, failed flashing tape, or sheathing that’s been wicking water for years. That’s the single biggest reason a door quote moves here, and we handle it by writing allowances into the contract up front. Any surprise gets priced and approved in writing before we touch it.
The core and the glass are different animals. A 2005 builder-grade vinyl door has a thin foam core, minimum-spec weatherstripping, and glass without a meaningful low-E coating or argon fill. A current replacement with a high-density foam core and low-E glass will cut heat transfer through the door by a measurable margin, and the weatherstripping will actually maintain its seal for more than a few summers. In Roanoke’s 100°F July afternoons, that’s the difference between a foyer that feels like a solar oven and one that stays at room temperature. Call (888) 635-0804 and we’ll show you the spec sheets side by side on paper.
The seal on your insulated glass unit has failed. Fog between the panes means the argon or krypton gas is gone and moisture has worked its way inside the unit. In Roanoke, we see this most often on 2000s-era double French doors where clay heave has racked the frame, flexing the glass unit until the seal breaks. The fix is a new glass pack or a full door replacement depending on the frame. The first step is a frame-level assessment. Call (888) 635-0804 for a free look.
If the door is original to the house and the jamb is still square, patching and repainting can buy you a few more years, but you’re still living with a door that leaks air and doesn’t meet current egress or weather sealing code. In the Roanoke town center, the right move is often a modern wood door with the same panel profile, set in a new code-compliant jamb. You keep the look and get a door that actually seals. We can quote both paths so you see the real cost difference before you decide. Estimates are free at (888) 635-0804.
Call TruePane for Door Installation in Roanoke
If your Roanoke door is binding, fogging, or just showing its age, call (888) 635-0804. We’ll schedule a free estimate, measure the opening, check the frame, and hand you a written line-item quote. No pressure, no vague promises. A square deal on a door that gets set right the first time.
Written by Dale Kessler, Owner at TruePane Windows & Doors.