Free in-home measure and quote - PGT, CGI and CWS impact lines compared on your actual openings, style by style
Fast, Reliable Sliding & Patio Doors Across Roanoke
Sliding patio door replacement in Roanoke typically runs $1,800 to $4,600 depending on size, glass package, and what our crew finds when the old unit comes out. We work throughout 76262 and 76299, and a live person answers our phone at (888) 635-0804 any hour you call. Roanoke is our backyard, not a territory on a map. We know the difference between a 1972 wood-frame house on the old railroad grid and a 2007 tract build off Litsey Road, and we quote them differently because they are different jobs.
Our Sliding & Patio Doors crew has been through this before: the door that bound in July, the handle that quit latching in December, the seal that fogged after Uri. Whether you’re in a 76262 subdivision or the older town center, we measure every opening twice, put the quote on paper, and register both warranty layers before the truck leaves your driveway. That’s the standard, not a sales pitch.
Why TruePane Windows & Doors Is Roanoke’s Preferred Sliding & Patio Doors Company
Dale Kessler founded TruePane in 2008 on a rule he still keeps on the whiteboard: if the pane is not true, the job is not done. That means we treat a patio door in Roanoke the same way we’d treat one in our own mother’s house. Background-checked, uniformed technicians. No subcontractor roulette. No fifteen-minute quote blown out by a five-minute look.
Roanoke homeowners call us because we’ve built a reputation for doing the job once and standing behind it in writing. Our Done Right Promise means that if something is not right after we leave, we make it right. No paperwork fights. No arguing. And The Keystone Standard means both manufacturer warranty layers are registered in your name, with durations stated, before we pull out of your driveway. Most homeowners have never had that done for them. They notice.
We schedule and dispatch from our Dallas-Fort Worth office, and our crews serve Roanoke directly. When you call, a person answers. Not a voicemail tree. Not a regional call center. A person who knows the area and can tell you when we’ll be there. We’ll be there when we say.
Our Sliding & Patio Doors Services in Roanoke
We install, replace, and service every type of sliding and patio door you’d find in a Roanoke home. Here’s what we handle most often.
Patio Sliding Doors
The standard two-panel or three-panel slider is the workhorse of Roanoke’s 2000s-era tract homes. When the original builder-grade unit fails, we replace it with a properly flashed, fusion-welded frame and low-E glass that holds up to North Texas summers. A typical patio sliding door replacement in Roanoke runs $1,800 to $3,400. We pull the old unit, inspect the rough opening, correct any racking from the clay, and install the new door with proper sill flashing and air sealing.

Panoramic Sliding Systems
For homeowners on larger lots in the 76262 subdivisions who want wall-to-wall glass, panoramic systems are the answer. A multi-panel panoramic slider in Roanoke typically runs $4,000 to $9,000 installed depending on panel count and glass coating. These are heavier units, and on Roanoke’s expansive clay they need a properly reinforced header and threshold support. We quote manufacturer lines side by side on paper so you see exactly what you’re buying, and we register both warranty layers before we leave.

Heavy-Duty Sliding Doors
Heavy-duty sliders matter in Roanoke because the soil doesn’t stop moving. A reinforced extruded-aluminum track and a frame that tolerates seasonal movement means the door keeps sliding true five years after the clay goes through another drought-and-rain cycle. We install heavy-duty sliding doors in Roanoke starting around $2,200 for a standard opening and up from there for wider or taller units. If the frame has already racked, we correct it at the opening before the new door goes in. That’s the only way to avoid a door that binds the following summer.

Pocket & Barn Doors
Pocket doors that disappear into the wall and barn doors that mount over the opening are popular in Roanoke’s newer builds and remodels. We can walk you through both, and we’re honest about which one makes sense for your opening. Pocket doors require framing work in the wall cavity; barn doors hang on surface-mounted track but need solid blocking above the opening. We’ll tell you what works on your frame, not what’s easier for us to sell.

Screen Door Installation
Roanoke’s mosquito-and-June-bug season is long enough that a good screen door isn’t an afterthought. We install heavy-duty sliding screen doors that track properly on the same floor as the main door and withstand years of the North Texas sun. Retractable screens, fixed-frame screens, pet-resistant mesh, whatever suits the opening. Expect $350 to $750 for a quality sliding screen door in Roanoke installed on an existing patio door.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Trusted Brands We Service in Roanoke
We’re an authorized installer for more than a dozen manufacturer lines, including, PGT, CGI, and ES Windows. For Roanoke’s specific climate and soil conditions, we often quote PGT and CGI for heavy-duty and impact-rated sliders, and we’ll put Ply Gem side by side with the premium lines on paper so you can see the difference in writing. Our technicians are trained on these systems and know which ones hold up to 100°F summers without warping. When you call for service, we’re not guessing at your door. We know it.
Common Sliding & Patio Doors Problems We See in Roanoke Homes
Here’s what actually turns up when we walk into Roanoke homes. This is not the generic list on every other website.
- Clay-soil heave racks the frame out of square. Roanoke sits on Blackland Prairie clay that shrinks in drought and swells in rain. Over ten or fifteen years, that movement pushes sliding door frames out of square, so the panel drags on the track and the latch misses the strike plate. A door that looks worn out is often a frame problem, not a door problem.
- North Texas UV bakes the original vinyl brittle. 100°F summers and relentless sun beat on the west-facing patio doors of 76262 tract homes. The builder-grade vinyl frame gets brittle, the glazing compound cooks, and the seal between the panes fails. We see this on nearly every 2005-2015 home we open up.
- February 2021-style freezes warp the threshold weatherstripping. That single-digit week wasn’t a one-off. Roanoke sees periodic hard freezes, and exterior sliding doors take the hit at the threshold. Warped weatherstripping means drafts and moisture bypass the sash. The door frame may be fine, but the threshold needs a proper repair or the new door will leak.
- Sill flashing was lapped wrong at original construction. We recently replaced a patio sliding door in a 76262 tract subdivision north of downtown where the original 2007 builder-grade vinyl unit had sagged on the jamb, leaving a ¾-inch gap at the strike side. Our tech found the sill flashing tape had been lapped wrong during original construction. We pulled the unit, corrected the rough opening, and installed a fusion-welded frame with low-E glass and argon fill before re-flashing with proper overlap and air-sealing the perimeter. That’s the difference between a door that lasts fifteen years and one that lasts thirty.
Pricing for Sliding & Patio Doors in Roanoke, TX
Here are honest numbers for the Roanoke market, not national averages. A patio sliding door replacement runs $1,800 to $3,400. Panoramic sliding systems start around $4,000 and go to $9,000 or more for wide multi-panel setups. Heavy-duty sliders run $2,200 and up. Screen doors are $350 to $750. If the frame is racked from clay heave, budget an additional $200 to $600 for rough-opening correction before the new door goes in.
What changes the number: glass package, panel count, whether the rough opening needs correction, and whether the existing flashing has to be redone. We quote it all on paper, line by line, before we start. No change orders that show up after the wall is open. A man from TruePane will walk your opening, take measurements, and hand you a written quote. Call (888) 635-0804 for a free estimate. Seniors and veterans get a permanent 5% discount.
We Also Serve Cities Near Roanoke
Our crews serve Roanoke and the surrounding communities of Southlake, Keller, Flower Mound, and Haslet. If you’re in one of those cities and need a patio door looked at, same number, same crew, same standard. Call (888) 635-0804 and a person will answer.
Serving Roanoke, TX - Our Local Coverage Area
We’re based in the Roanoke area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Sliding & Patio Doors in Roanoke
In most cases, yes, Roanoke requires a permit for replacing a sliding patio door when the opening changes size or the frame is being reset, and the inspector may require the rough opening to meet current code for flashing and egress if the wall is opened. We pull the permits, coordinate inspections, and factor the code requirements into the written quote before we start. That means no surprises on the bill. Call (888) 635-0804 and we’ll tell you exactly what your opening triggers.
The expansive clay under Roanoke shrinks during dry spells and heaves after rain, and over ten to fifteen years that movement pushes sliding door frames out of square. A panel that drags on the track or a latch that doesn’t catch is usually a frame problem caused by the soil, not a broken door. We assess the frame level before quoting any replacement. If the opening is out of square, we correct it. If we don’t, the new door will have the same problem in a season or two.
If the seal on an insulated glass unit has failed and moisture is between the panes, the glass needs to be replaced, and on a 2005-era builder-grade unit the frame is often at the end of its life too. We can replace just the glass on some units, but if the vinyl has gone brittle from North Texas UV, a full door replacement is the better spend. We’ll quote both options on paper so you can decide with real numbers. Call (888) 635-0804 for a free estimate.
The 2000s-2010s tract subdivisions in 76262 were built with minimum-spec builder-grade vinyl windows and doors, and those units have a service life of roughly fifteen to twenty years under Roanoke’s UV and soil movement. Whole neighborhoods are hitting that threshold at the same time. We see it constantly. If your neighbors’ patio doors are being replaced, yours is probably due too. Call (888) 635-0804 and we’ll give you an honest assessment.
In most 2000s-era tract homes the rough opening is framed for a standard slider, and a heavy-duty unit needs more support at the header and sill. We can usually reinforce the opening from inside the existing wall cavity without tearing out drywall on both sides, but it depends on the framing. We’ll inspect the header and sill plate before quoting. You’ll know exactly what’s involved and what it costs before we start. Call (888) 635-0804 to schedule the inspection.
If your patio door is not sliding true in Roanoke, it’s not a question of if it fails, it’s when. Call (888) 635-0804 to schedule your free estimate. A live person will answer, and we’ll be there when we say.
Written by Dale Kessler, Owner at TruePane Windows & Doors, serving Roanoke and the DFW metro with a second-generation glazier’s craft standard since 2008.



Before
After
Before
After
Before
After