Window Replacement in Melbourne - Free In-Home Measure, Written Price

Fast, Reliable Window Replacement Across Melbourne

Window replacement in Melbourne, FL almost always comes down to one question: what has the salt air already done to your frames, and what will you install so it doesn’t happen again in ten years. Melbourne sits on a narrow coastal strip between the Indian River Lagoon and the Atlantic Ocean, so homes here take salt exposure from two directions at once. That changes the materials, the scope, and the honest price of the job. If you’re in the 32901 ZIP or nearby, call us at (888) 635-0804 and we’ll come measure, inspect the rough openings, and give you a written quote for the real job, not a brochure estimate.

Call (888) 635-0804

Key takeaways for Melbourne homeowners:

• Pre-1980 concrete block homes here almost always need masonry work, not just a window swap.
• Brevard County wind-load codes require Florida Product Approval impact-rated units for permitted replacements.
• Dual salt-air exposure from the lagoon and the ocean corrodes aluminum frames miles inland from the beach.
• Full frame replacement on a 1960s CBS ranch typically runs $1,800-$3,200 per opening once masonry patching is factored.
• TruePane crews serve Melbourne locally, coordinated from our South Florida dispatch office.

Why TruePane Windows & Doors Is Melbourne’s Preferred Window Replacement Company

We’ve been doing window replacement long enough to know that Melbourne’s housing stock doesn’t forgive shortcuts. The 1960s concrete block ranch homes that fill the 32901 ZIP were built fast during the Space Race boom, and many still carry their original aluminum jalousie or single-pane casement windows. Those frames oxidize, pit, and bond into the block. A crew that treats that like a simple swap is going to leave you with a patched mess or an out-of-true install. We don’t.

TruePane was founded by second-generation glazier Dale Kessler on a rule that still governs every job: if the pane is not true, the job is not done. Every Melbourne replacement is handled by background-checked, uniformed technicians who measure every opening twice, quote manufacturer lines side by side on paper, and register both warranty layers before the truck leaves your driveway. That’s The Keystone Standard, and it’s in writing on every job we do.

Our Window Replacement Services in Melbourne

We install and replace residential windows across Melbourne, with a focus on the specific demands of concrete block construction and coastal wind zones. Here’s what we handle most often for Melbourne homeowners:

Full Frame Replacement

Most pre-1980 Melbourne homes need full frame replacement rather than an insert. That’s because the original aluminum frames have corroded and bonded into the concrete block rough opening. We extract the old frame, hammer-drill and patch the masonry as needed, then set a properly anchored, Florida Product Approval-rated unit. This is the scope item inland markets rarely quote, and it’s the difference between a window that seals and drains correctly and one that leaks into the block within three years.

Insert Window Replacement

If your home’s existing frames are still square and structurally sound, an insert replacement can be a tight, cost-effective option. We see this more often on Melbourne homes built after 1990 or on units that were replaced once already. We’ll tell you honestly if an insert will hold up in a 130+ mph wind zone or if the opening needs a full-frame job. We don’t sell an insert into a corroded frame.

Vinyl Replacement Windows

Vinyl makes sense for a lot of Melbourne homes, but only with the right spec. We specify vinyl units with welded corners, reinforced meeting rails, and stainless steel or zinc-coated hardware that won’t corrode from lagoon-side salt air. Cheaper vinyl frames with roll-formed hardware fail fast in Melbourne’s dual salt exposure. We stock and quote lines like ECO Window Systems and ViewLux for homeowners who want a solid vinyl option without paying for architectural aluminum.

Energy-Efficient Upgrade

Melbourne’s cooling season runs from March through November. Single-pane jalousie windows from the 1960s leak conditioned air all day, every day. Replacing them with low-E, double-pane, impact-rated units cuts solar heat gain through the glass and seals the building envelope. We help Melbourne homeowners in the 32901 ZIP choose glass packages that meet code and actually reduce the AC load, with written comparisons of manufacturer performance data.

What Window Replacement Costs in Melbourne

Window replacement in Melbourne runs higher than inland Florida because of two local realities: concrete block rough openings that require masonry work on pre-1980 homes, and Brevard County’s wind-load requirements that mandate impact-rated units. Here are the anchors we quote from in the 32901 ZIP:

• Impact-rated impact windows generally run $800-$1,500 per window installed when the opening is clean.
• Impact single-hung units run $900-$1,800 per window installed, depending on size, DP rating, and frame material.
• Large or custom openings, including picture windows or sliding glass door conversions, run $2,500-$5,000 per opening.
• Whole-home packages on a typical 1960s Melbourne ranch run $8,000-$18,000, and larger or elevated homes can reach $25,000+.

What moves the number in Melbourne specifically: if the old aluminum frames have bonded into the block, expect masonry labor on every opening, typically 2-4 hours per window. Opening count, floor height, and whether the home sits in a wind zone requiring higher design pressures all matter. We give every Melbourne homeowner a free in-home measure and a written line-item quote. Call us at (888) 635-0804 to schedule yours.

Trusted Brands We Service in Melbourne

TruePane is an authorized installer for more than a dozen manufacturer lines, and for Melbourne homes we typically quote PGT, Andersen, Marvin, Milgard, and CGI side by side on paper, giving you a clear look at frame material, glass package, and design pressure rating before you commit. We also work with Therma-Tru for door replacements and Mr-Glass for specialty glazing where the project calls for it. No smoke, no upselling, just a square deal on whatever you choose.

One decision Melbourne homeowners should make early: impact windows versus hurricane shutters. Shutters only protect you when someone is home to hang them, and they do nothing for daily energy loss, salt-air corrosion, or the constant draft of old jalousie glass. Impact-rated windows work every hour of every day, not just when a storm is twelve hours out. That is why most Melbourne homeowners choose impact units and skip the plywood-and-clip routine altogether.

Common Window Replacement Problems We See in Melbourne Homes

• Fused aluminum frames in concrete block. Original 1960s jalousie frames oxidize so deeply that they bond to the rough opening. Extraction requires hammer-drilling and masonry patching. If your quote doesn’t include that line item, it isn’t a Melbourne quote.
• Dual salt-air corrosion miles from the beach. The Indian River Lagoon’s brackish air on the west side is just as aggressive as ocean air on the east. Seals blow and hardware pits on homes that never see the surf line.
• Non-rated single-pane glass failing wind-load code. A 130+ mph wind zone doesn’t care that the window lasted sixty years. Any permitted replacement requires Florida Product Approval impact-rated units, and we handle the paperwork.
• Jalousie windows leaking conditioned air year-round. Those slatted glass panels were never sealed. Melbourne homeowners replacing them typically see immediate cooling-bill relief, though the exact savings depend on the home’s insulation and AC condition.

Salt Air Decides the Materials, Not Just the Schedule

Most window companies talk about salt air as a beachfront problem. In Melbourne, that’s wrong. The city occupies a narrow corridor between two salt sources: the Atlantic on one side, the brackish Indian River Lagoon on the other. For a 1960s CBS ranch in the 32901 ZIP, that means the original aluminum frames have been corroding from two directions for fifty or sixty years. Pitting, edge lifting, blown seals, and frames that crumble when you try to remove them, this is the normal starting condition for window replacement in Melbourne, not the exception.

On one recent job, a homeowner near the 32901 ZIP called us expecting a simple swap. They had a 1960s CBS ranch with original aluminum jalousie windows, and the glass was fogged. When our crew started the first extraction, the frame had oxidized and bonded into the concrete block so completely that we had to hammer-drill the rough opening and patch the masonry before the new unit could be set. We showed the owner the pitted frames and failed seals on the ground, and they saw exactly what decades of dual lagoon and ocean salt exposure had done. We installed PGT impact-rated casement windows with laminated glass interlayer, anchored properly and sealed against the salt air. The owner’s comment was straightforward: they’d assumed it was a glass job, not a wall job. That’s what Melbourne window replacement actually is, and we budget for it on every quote.

That’s why we specify differently here. On Melbourne homes we push for stainless steel or hot-dip galvanized hardware, marine-grade finishes on exposed metal, and sealed joints at every penetration. Vinyl becomes viable only with welded corners and reinforced meeting rails. Architectural aluminum needs a marine-grade coating. The inland-spec version of any of these materials is cheaper by $60-$120 per window on the front end, and it starts failing within a decade. The coastal spec costs a little more and lasts. Dale Kessler built TruePane on exactly this calculation: do it once, do it right, and stand behind it in writing.

Florida Pays You Back

Melbourne homeowners have several incentives available when they upgrade to impact-rated windows and doors, and the stacking matters. My Safe Florida Home matching grants have provided up to $10,000 toward qualifying wind-mitigation upgrades for approved applicants. Florida’s sales-tax exemption applies to impact-resistant windows and doors at the time of purchase. The federal 25C energy credit can return up to 30% of qualifying product cost, up to $600 per year for eligible units. A wind-mitigation inspection ($75-$150) may also unlock windstorm premium credits, with many carriers averaging around 25% off the windstorm portion of the policy. We don’t guarantee any of these figures, programs change and carriers set their own final numbers, but we’ll point you to the right paperwork and provide the product documentation you need.

Local Expertise That Shows Up in the Quote

What separates a Melbourne-specific window quote from an inland boilerplate bid is the masonry line item. In Orlando or Gainesville, most homes are wood-frame, and a window company can pull the old unit and set the new one the same afternoon with a nail fin. In the 32901 ZIP, the old aluminum frames are frequently oxidized and bonded into the concrete block. Hammer-drilling a fused frame out and patching the rough opening before setting the new anchors is not a surprise scope item, it’s the standard pre-1980 job. Melbourne homeowners who get a wood-frame-market quote will see the number come in $80-$150 per opening lower, and then they’ll watch the crew discover the real job on install day. We’d rather give you the real number up front. That’s a square deal.

We also handle the permit paperwork. Brevard County requires Florida Product Approval or Miami-Dade NOA documentation for impact-rated units in Melbourne’s wind zones. We pull the permits, file the product approvals, and pass inspection before we call the job done.

We Also Serve Cities Near Melbourne

Our crews serve Melbourne and the surrounding Central Florida corridor, including Kissimmee, Orlando, Lakeland, and Daytona Beach. If you’re in one of those communities, the same Window Replacement expertise and The Keystone Standard apply. Call us at (888) 635-0804 and ask for a free in-home measure.

FAQs - Window Replacement in Melbourne